What gives an increase in the speed of the Internet. Check equipment, network status and connection speed. Diagnostics by standard means

These days, routers work with a lot of pressure: every new gadget strives to get an Internet connection via Wi-Fi. The smart home kit is becoming more and more popular, including lighting, thermostats, and security cameras. Therefore, often your Internet connection slows down and often just when you are watching an exciting show through online TV.

Speed ​​up Wi-Fi

You may not need to spend money to deal with this problem: there are free ways to speed up Wi-Fi. Only if the cause is a slow link or an old router, you may need to upgrade your package and hardware.

But first, try these tips.

1. Move the router

Specialists are well aware of cases when routers were placed somewhere under the sofa or hidden in the very corner of the room. Understandably, not everyone likes it when some ugly box ruins a room's immaculate look, but if you want good Wi-Fi, you need to give your router some room.

Place the router in the middle of the house or apartment

The best place to do this is in the middle of your house. In most cases this is not possible because the telephone line or cable box is on the wall. But if possible, plug in a phone cable extension and move the router so it's roughly centered and as high off the floor as possible. This will provide a strong and fast Wi-Fi signal throughout the room.

2. Eliminate interference

Wi-Fi may be unstable and ideal conditions, but you will definitely worsen it if you place cordless phones, a microwave oven, baby monitors and Bluetooth devices near the router. Even some garlands can interfere with the signal and reduce the speed to a level less than that provided by dial-up modems released in 1999. Therefore, keep the area around the router free from other electronic devices.

3. Use the fastest settings

Routers are not the most user-friendly devices. You don't need to know the difference between Wi-Fi standards and frequencies, but you will need to set some settings manually, as only the best routers can provide the most possible speed automatically.

The vast majority of Wi-Fi devices now operate on the 802.11n standard, which uses two frequencies. If your router is dual band, it can transmit on both 2.4GHz and 5GHz. Since the 2.4 GHz frequency is more common, all devices that are near the router (including not only yours, but also the neighbors) load the available channels.

An example of a significant difference in speed when connecting at a frequency of 2.4 GHz and 5 GHz

If your smartphone, tablet, laptop, or other device can connect at 5 GHz, switch to it. As long as you are relatively close to your router, you will get a faster and more reliable connection.

Some routers broadcast two separate Wi-Fi networks, so it's easy to tell them apart. However, the rest (especially the BT Home Hub) combine them - you need to go into the settings to set the display of two bands.

4. Change antennas

Some routers have detachable antennas. In this case, you can buy a higher gain antenna, which will give you a faster and stronger Wi-Fi signal. There is a less expensive way that will help you even if it is not possible to physically move the router to another location. You need to make a reflector (reflector) and place it behind the router. The signal will be reflected from the reflector and sent in the opposite direction.

Dartmouth College students have successfully proven that a simple tin foil reflector can effectively increase Wi-Fi coverage. It also has the side benefit of limiting coverage behind you, so you won't send a signal to the street or .

5. Reboot your router from time to time

This old trick cures a lot of problems, including bringing Wi-Fi back to its former speed. In this case, all devices are disconnected from the network, and then connected again. It is also useful to change the default password. Most modern routers have protection, as they say, “out of the box”, but just in case, you need to check this.

6. Update your router

And finally, if you have an old model, it's time to buy something better. Wi-Fi technology has come a long way since last years so there are several options for improvement.

One is to purchase a model that uses 802.11ac (preferably one that supports MU-MIMO for better protection). Such a router is guaranteed to increase coverage and speed. Unfortunately, not all devices, except for high-tech smartphones, tablets and laptops, support 802.11ac yet, so they will use the slower 802.11n standard supported by all routers that currently exist.

The best option would be to purchase a set with built-in Wi-Fi, although this is only advisable if there is a place in your house (apartment) where the signal does not “finish off”.

More expensive, but also more effective method– buy a mesh Wi-Fi system. Such kits contain several routers that interact with each other and steadily distribute fast Wi-Fi even in the largest houses.

More on the site:

How to increase internet speed over Wi-Fi? Speed ​​up wireless internet. updated: January 25, 2018 by: admin

You can increase the speed of the Internet using special programs or using the capabilities of operating systems.

By default, the operating system reserves approximately 20% of the bandwidth of the entire Internet speed. As a result, 1/5 of the entire speed is lost. This feature can be easily disabled.

You need to go to start - execute and write gpedit.msc and click OK.

Then a group policy will appear in which you need to go to the following options: "computer configuration", "administrative templates", "network", "QoS packet manager" and then go to the "limit reserved bandwidth" menu.

Then you need to double-click to open the found tab and see the settings. Change the value to your liking.

Another parameter that affects the speed of the Internet, is a half-open connection restriction that was introduced by Microsoft to limit the spread of virus programs from sites or computers over a network and to limit the computer's possible participation in DoS attacks.

The rate limit is necessary so that the computer does not have more than 10 simultaneous half-open outgoing connections. When the speed reaches the connection limit, subsequent attempts to connect to the network are queued.

As a result, the user has a limited network, which negatively affects the operation of the Internet. This limit affects outgoing connections and does not change the speed of incoming connections.

To find out the number of half-open connections and check whether they are limited or not, you can use the special Half-open limit program. With its help, you can remove these restrictions.

Operating systems have a function to check for available updates for installed programs, which also slows down the Internet speed. These functions, at least a little, but reduce traffic when connected to the network. There can be up to several dozen such calls to search for updates. If you turn them off, you can slightly increase the speed.

However, there are programs which cannot be turned off the search for updates. This applies to those programs in which each update weighs up to 100 MB. In this case, you need to turn on the firewall, in which you can prohibit the network from accessing programs, as well as designate those that should be updated.

Increasing the speed in Windows XP, 7

Speed ​​increase through QoS packets

To increase the speed of the Internet in Windows XP, you must again go to gpedit.msc and in the "Computer Configuration" menu select "Administrative Templates", then "Network" and go to the "QoS Package Manager".

We increase the speed of the Internet through ports

There is another possibility to increase the speed of the Internet in Windows 7. To do this, go to " My computer' and open the tab ' properties of the system", then go to " device Manager and open ports.

You need to find the ports that are responsible for connecting to the Internet. Most often these are “catfish” ports. Ports can be from 2 or more. You need to open their properties and go to the "port settings" tab and then find the "bits per second" item parameter and set the maximum possible number. After that, the bandwidth will increase and the speed of the Internet will increase.

Notebook power mode

All laptops and computers running Windows 7 are set to Balanced Power Mode. If on ordinary PCs the speed of the Internet and the stability of the Internet connection, this mode is quite acceptable, then in the case of laptops with the Internet, problems may occur (if using a wireless connection). Internet connection via wi-fi may disappear due to the set balanced mode, or the Internet speed may drop.

The speed of access to the Internet, voiced by the provider, often does not correspond to reality. The problem often lies not only in the quality of the services provided, but also in the configuration of the devices used by the end user. This article is intended to answer the question of how to increase the speed of the Internet to the one promised when concluding an agreement with a telecom operator.

First of all, you need to pay attention to the settings of the operating system installed on the PC, as well as to exclude the possibility of malware affecting the data transfer speed on the Internet.

Checking "eaters" of traffic

To begin with, you should check running applications: a torrent client included at system startup, a game service, or other programs that require constant access to the Internet. These are possible "provocateurs" of improper speed.

Detailed information about traffic consumption in the "Task Manager" is available only to users of Windows 8 and higher systems. For Windows 7 there is another way.

In the "Processes" tab there is a column with the heading "Network", here you can find out which application and to what extent affects the speed and consumed Internet traffic. Disabling unnecessary in this moment programs is done by highlighting the corresponding application and pressing the "End task" button.

In editions of the Windows 7, 8 system, there is a similar utility called "Resource Monitor". To access it, you need to enter the phrase "Resource Monitor" in the search line "Menu" - "Start", run the program that will be issued upon request. Next, select the "Network" tab: by default, the processes in it are sorted by the number of bytes consumed per second. It is impossible to close the processes that affect the speed of access to the Internet through this program, therefore, having identified the consumer, you need to return to the "Task Manager" and remove the task corresponding to the exe file:

The speed of the Internet can temporarily decrease due to the activity of the "Update Center", which is also noted in the "Task Manager" under the corresponding item. You must wait until the download from the Internet is completed and the operating system updates are installed on the PC, and then continue with normal work.

Setting up the package scheduler

Further actions will be aimed at reducing the bandwidth limit. The Windows system reserves 1/5 of the total passing traffic and this can adversely affect the speed of the Internet. This limit must be reduced to zero.

The launch of the "Local Group Policy Editor", where the scheduler will be configured, is carried out by pressing the Win + R key combination and entering the gpedit.msc command in the window that opens:

In the "Editor" you should go to the following folder: "Computer Configuration" - "Administrative Templates" - "Network" - "QoS Packet Scheduler". Several items will appear on the right side of the window, the desired one is “Limit reserved Internet bandwidth”:

In the window that opens, click the "Enable" item, and in the lower field called "Parameters" set the "Bandwidth limit" value to 0%. When finished working with the window, click the "Apply" and "OK" buttons. Now the system will not limit the Internet speed:

The default scheduler is sometimes disabled in adapter options. To check through the "Start" menu, select "Control Panel", then - "Network and Sharing Center". The connection is displayed as active. To go to the "Connection Status" window, click on the name. In the window that opens, click on the "Properties" button and activate the "QoS Packet Scheduler" item, confirm the selection by clicking the "OK" button. It is recommended that you restart your computer after completing this procedure. The question of how to remove the default Internet speed limit in Microsoft has been resolved!

Setting up a network card

For better system power efficiency, some device settings are set to save mode. This also applies to a network card installed in a personal computer.

From the Start menu, go to Control Panel. In the "System and Security" section, you need to find a utility called "Device Manager":

In the "Manager" window, double-click on the "Network adapters" item to get a list of available devices. An adapter is selected by double-clicking on it.

In the "Power Management" tab there are two items: "Allow the device to turn off" and "Allow the device to wake the computer from standby (sleep) mode." We remove the modes by unchecking the boxes. The settings are confirmed by pressing the OK button. After restarting the computer, it is recommended to check the Internet speed:

On laptops, this setting is quite critical: the computer's battery life is at risk of decreasing. If you notice an increase in the battery discharge rate after performing this action, it is recommended to return the checkmarks to their places.

Change the power plan

Changing the power plan to a more productive one will positively affect the speed of the network adapter. In the "Control Panel" you need to find the "System and Security" section, then "Power Options". The required item "High performance" is activated by clicking on it:

This setting will increase the supply of electricity to the elements of a personal computer, which will increase the speed of Internet access. As in the case of deactivating the disconnection of the network adapter, the laptop battery discharge rate may increase, then you should use this power plan only while the portable device is running from the adapter if you need to resolve the issue of how to speed up the Internet on the laptop.

COM port extension

To configure the serial COM port through the Start menu, enter the Device Manager utility. Double click - in the "Ports (COM and LPT)" section. The transition to the properties of the device called "Serial port (the abbreviation COM with a number must be indicated in brackets, in our case - COM3)" is also carried out by double-clicking on the name:

In the "Port Settings" tab, find the "Bits per second" indicator and select "128000" in the drop-down list. To confirm - "OK":

By increasing the maximum throughput of the port, the likelihood that the speed of access to the Internet network will increase to the required values ​​increases.

Installing additional programs

To help standard solutions from Microsoft come developments from third-party manufacturers that allow you to expand the capabilities of the Internet on your computer.

TCP Optimizer (https://www.speedguide.net/files/TCPOptimizer.exe) is free software distributed through the SpeedGuide resource. The program is positioned as accelerating access to the Internet by changing the TCP / IP settings, allowing you to remove the Internet speed limit:

After downloading and running, no installation is required, TCP Optimizer immediately offers the user an interface. On the main General Settings tab in the upper part there is a slider that must be set to the position corresponding to the Internet connection speed declared by the provider. In the Network Adapter selection drop-down menu, select the network adapter, and at the very bottom of the window, in the Choose settings item, check the box for Optimal. The choice is confirmed by pressing the Apply changes button and rebooting the PC.

Second assistant in solving the issue of how to speed up Internet work, - a free utility from Softonic - NameBench (https://en.softonic.com/download/namebench/windows/post-download?sl=1). It selects the best DNS server from the list, allowing you to access site domains through the fastest intermediary:

The program is installed by unpacking it into a user-friendly directory. After running the maximum that is required, press the Start Benchmark button. The search takes a certain time: the resource has a large number of sources.

When the search is completed, the default browser displays the result for the current DNS setting and the recommended configuration - Recommended configuration (fastest).

Checking and configuring DNS

Through the "Control Panel" select the sub-item "View network status and tasks", located in the "Network and Internet" section. Here you will need to select an active network, clicking on which takes you to the connection status window, and from there to "Properties". When using the IPv4 protocol, you need to highlight this item by pressing and go to "Properties":

The main tab "General" contains the addresses of the DNS servers provided by the provider by default:

In the sections of the DNS servers “Preferred” and “Alternative”, you need to enter data from the NameBench program, then check the box “Confirm settings on exit” and close the window by clicking the “OK” button.

Virus check

The first thing to do, if familiar, is to check the PC with antivirus software. An effective utility that does not require installation and constant work in the background - Dr.Web CureIt! (https://free.drweb.ru/download+cureit+free/):

Before starting, you need to close all programs, including those using the Internet. After launching the anti-virus package, click on the "Start scan" button and wait for the completion of the verification process and treatment.

Fix your router

If the devices are connected to the Internet through a router, it must be serviced to ensure top speed.

Features of a DSL connection

In ADSL connection technology important role a splitter plays - a small “double” device, on one side of which a landline phone is connected, on the other - a modem and a telephone line. It is important to check the connections and sockets of the splitter, if necessary, replace it with an improved version.

Firmware update

With the release of new software, router hardware problems that affect the speed of Internet access are often fixed. Keep the device software up to date at all times.

On the packaging or on the back panel of the router, the data for entering your personal account is indicated. As a rule, access to the interface occurs at the addresses: 192.168.0.1 and 192.168.1.1, the login-password link is admin-admin.

Among the menu items you need to find "Firmware Update". For a successful process, the router must be connected to the computer on which the update is being searched for via an Ethernet cable.

Determining the correct location of the router

It is necessary to install a router in the center of an apartment or room at a height of 1.5-2 meters. It is not recommended to place other signal sources of wireless interfaces - Bluetooth, other Wi-Fi points - in the immediate vicinity of the router. Compliance with all these requirements will increase the speed of the return of the Internet several times.

Changing the Wi-Fi channel

If the points WiFi access installed everywhere, there is a high chance that they will interrupt each other's signal. It is important to remember that Wi-Fi points operate on certain channels. An easy way to find out if a channel is busy is to download the Wi-Fi Analyzer app on your smartphone from the Google Play Store or App Store. A free utility shows the signal strength in the form of a graph, which clearly shows empty zones - free channels:

Having defined best option, in the router interface, section WiFi settings, you need to find an item called "Channel". After setting the desired value, you should save the setting and reboot the router, and then check the data transfer rate.

Check for unauthorized connection to the router

One of the possible options for "leaking" the speed is to connect to the router of third parties. This happens when there is no password on the access point, or the password from the point is easily selected.

Detecting "illegal immigrants" is very simple: through the interface of the router. The Wi-Fi Status tab contains a list of connected devices. If an unfamiliar device is among the listed devices, it is recommended to immediately set or change the password of the Wi-Fi point in order to protect your Internet traffic from external use.

Choosing a Fast Browser

Additional functionality in popular browsers, for example, Turbo mode, can speed up the loading of pages on the Internet:

Opera and Yandex Browser have a built-in "accelerator". By enabling this mode, the user does not download the site directly to the computer, but sends it to secure servers on the Internet, where the media is compressed, then the processed page is sent to the computer, while the download speed increases significantly.

Google's browser - Chrome - does not have this mode, however, the Google store has an official add-on called "Traffic Saver", after installing it, it becomes possible to reduce up to 70% of the size of media files downloaded from the Internet.

The 2ip service conducted its own research, during which browsers with Turbo and similar modes enabled were tested. The test showed that in Yandex.Browser, the speed of loading pages from the Internet on a 3G modem is almost instantaneous. This fact allows us to designate this browser as optimal for slow connections, and the problem of how to remove the limitation on the speed of the Internet connection has been solved again.

In order to increase the speed of the Internet, it is recommended to use the following useful tips, giving the opportunity to correct the situation at home, namely:

1. Choosing the most efficient tariff. The subscriber's existing plan may simply not meet the requirements. Switching to a high speed package is one of the preferred actions.
2. Modernization of a personal computer. The network card installed in the PC may be outdated or out of order, which negatively affects the speed of the Internet connection. A new generation external network adapter will solve the problem of slow access.
3. Purchasing a new router. Modern technologies, including the 5GHz frequency standard, which replaced the outdated 2.4GHz, will save you from "brakes" and freezes when loading.
4. Connecting to another server. Remote hosting may be located too far from the current location of the computer, which affects the connection speed with the server on the Internet. The same applies to overloaded servers, it is worth waiting until the load peak decreases.
5. Establishing an Ethernet cable connection. Internet operation without wires is convenient, but less reliable than the cable option. If you find a speed drop when working with wireless interfaces, you should try an Ethernet connection.

Users on the global network will find a lot of other recommendations on how to overclock the speed of the Internet, but some of the tips are already outdated, and some are not safe for a PC. The main thing, perhaps, is that you can accelerate, but maintain a reasonable balance between comfort on the Internet and the security of data on your computer. The second seems to be more important than the first.

The performance of a computer depends on its characteristics and the speed of the Internet. Its value affects the time of opening pages, downloading information from sites. To understand how to increase the speed of the Internet, it is necessary to clearly understand the whole range of technical tools and programs that affect the bandwidth of the signal receiving channel. The main influencing factors are the maximum speed provided by the provider, the length of the cables before and after the router, its bandwidth, the characteristics and programs of your computer.

Checking the connection speed and network status

Before starting connection speed tests, you need to find out the characteristics of receiving and transmitting information provided by your provider under the tariff plan. These values ​​are indicated in the contract for the provision of information services, or are located on the provider's website on the page describing the characteristics of different tariffs. Please note that sending information to the network is faster than downloading. Provider companies in the tariff plans indicate the maximum value of these two data.

Internet connection speed testing

The easiest way to check connection speed is to use special programs and websites. One of the most common is the speed test site speedtest.net. When you open the page at this address, a window appears on the screen with the button "Begin test". After pressing this button, the site initiates sending a ping (ping signal) to the server closest to you and measures the speed of transmitting and receiving a signal from the server. By clicking on the picture in the form of a prism in the center of the screen, the test can be repeated with a change in the control server.

Rebooting the Router

A frequent violation of signal reception is a failure in the protocols of routers (or routers). Such an effect can appear in the event of a short-term disruption of contact or the influence of some external electromagnetic interference on the information transmission channel. To solve this problem, you need to briefly turn off the router. After turning it on and establishing a connection with the server, the connection can be restored.

Conflicting Signals

If you use Wi-Fi to receive the signal, be aware that you may be delayed in receiving information due to other wireless networks and routers nearby. Most older routers operate on the 2.4 GHz transmission frequency. More modern routers use the 5 GHz channel. At the same time, the channel for receiving and transmitting information on the air is used in turn by all routers whose coverage areas are near you. An increase in Internet speed in such a situation is possible only by purchasing a new router with a 5 GHz channel.

How to increase internet speed

There are several ways to add internet speed to your computer. If you try to load a site you frequently use in different browsers, you will notice differences in loading. The fastest by far are Google Chrome, Mozilla Firefox, Opera and Yandex.Browser. The last two have a turbo boost mode for loading sites on a slow connection. Network speed may vary depending on the traffic-consuming software that is installed on your computer.

Checking your computer for viruses

One of the most malicious programs are viruses. These are programs that are designed specifically to create problems, big and small, in the operation of personal computer software. Many of them have the ability to steal saved logins and passwords from websites and financial applications from the computer's memory. You can get virus programs when downloading information from the network, viewing photo and video content from unfamiliar sites, receiving and reading letters received from unreliable sources.

Removing malware or adware

Computer software is protected by anti-virus programs, whose task is to detect attempts to intrude into a computer, determine the type of virus, and create obstacles to infecting it. Companies producing anti-virus programs collect, study all viruses on the network, create ways to deal with them. The most famous are the antiviruses of Kaspersky Lab, Dr.Web, ESET NOD 32, 360 Total Security.

Browser update

Regularly updating all software can significantly affect the speed of your computer. This applies to the operating system, video plugins, browser updates. The performance of different versions of browsers is different for each operating system. It is worth trying and choosing a fast browser for your computer. While browsing the web, users find interesting web resources and save them as Bookmarks. When updating browsers, all basic user settings, saved logins, passwords, bookmarks are saved.

Hard drive cleaning

The speed of receiving and saving information from the network depends on the speed of writing and reading your hard disk - hard drive. Service files may remain on it, the removal of which requires optimization and disk cleanup. The system utilities have a defragmentation function, the regular execution of which can organize the location of files on the disk. This utility collects pieces of files all over the disk and makes whole fragments from them, then whole files are assembled from fragments.

Cache optimization

Modern operating systems to speed up the work of programs frequently used by the user load them into the cache. The browser cache is a reserved portion of RAM or hard drive memory. Browsers are recommended to use the average value, which is suitable for most running programs. It makes sense to reduce the cache size in the browser settings only when performing the same type of operations on the computer.

Disabling unnecessary programs that consume traffic

If you open the Settings->Network and Internet->Data usage->Usage details tab in Windows 10, the user will be able to assess which applications are actively consuming data. To speed up the work, these programs can be disabled, limit their automatic updates. If the Internet is slow, you can limit the download of updates and the consumption of traffic by the system itself by setting the limited connection type: Settings-> Network and Internet -> Wi-Fi-> Advanced settings-> set as a limited connection.

Changing the channel of the Wi-Fi router

Wireless connections on cheap routers for the mass consumer operate in the 2.4 GHz band at maximum frequencies up to 300 Mbps. At the same time, the nominal speed is reduced by 2-3 times due to settings and other factors. In the presence of conflicting WiFi signals, it is worth purchasing routers or repeaters that work with WiFi protocols: 802.11g, 802.11n, 802.11ac, which have speeds up to 1000 Mbps, automatic switching between 2.4 GHz, 5 GHz frequency bands. High-quality WiFi signal transmission equipment is produced by ASUS, Totolink, Netgear.

How to speed up the Internet in Windows 7, 8 and 10

To speed up work in Windows, the following manipulations with the operating system and additional programs can help:

• removal of restrictions on the bandwidth of the network connection;
• configuring reserved bandwidth;
• optimization of equipment operation;
• Internet acceleration by choosing a fast DNS server;
• use of programs to speed up the connection;
• installing the TCP Optimizer utility;
• launching the Internet Speed ​​Booster application;
• using the Proximodo program.

Increasing network bandwidth

In order to improve the Internet connection due to the settings in the network connection bandwidth, you must perform the following steps:

1. Open Computer Properties->Hardware Tab->Device Manager.
2. Find the item Ports, press the down arrow.
3. Select the item Serial port (COM1), open its properties.
4. Select the port settings item and set the speed higher than the specified one.
5. Press the OK button.

Configuring Reserved Bandwidth

The Windows operating system has a QoS Reserved Bandwidth Limit system that specifically limits your traffic for its service applications. The width of this channel is about 20 percent of the maximum speed. To reduce the ability of the QoS packet scheduler to limit the rate, it is necessary to reduce the bandwidth of the reserved channel in Windows to zero and receive all 100% of the traffic. It is worth doing the following:

• Start->Run, type the word regedit, press the Enter key.
• In the registry editor, go to the following path: HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Microsoft.
• Create a new key (Key) named Psched.
• Create new parameter DWORD type, name it NonBestEffortLimit.
• To disable channel reservation, set the NonBestEffortLimit key to 0.

How to increase the speed of home Internet by optimizing the operation of equipment

The speed of loading files and pages in the browser depends on many factors - the performance of the equipment and its settings. When checking the entire system for obtaining information, you should carefully consider the revision of all possible nodes that can affect the speed. When using satellite Internet, the connection is affected by wind, snow, rain, and other meteorological phenomena. In order to speed up the Internet on a computer, it is necessary to optimize the operation of the entire provider-browser system, check the quality and settings:

• network cables;
• router (router);
• network cards;
• Internet connection settings, DNS server selection;
• install special programs to increase speed.

Network cables

Connection performance may be affected by network cables. For this purpose, twisted pair is used. Home Internet wiring is done from the roof of the house or attic. The length of the network cable from the provider's junction box to your router should not exceed 50 m. It is necessary to monitor the absence of mechanical damage to the cable and the presence of power wires and cables passing near it that can induce strong electromagnetic fields. When using wired Internet, the distance from the router to the computer should be no more than 10 m.

Router optimization

You should start configuring the router by determining its model and version number. On the manufacturer's website in the support section, select your model, download the router firmware update. You will need to find the router's default gateway or IP address in order to access the router's web interface:

• From the Start menu, type cmd in the search box, at the command prompt, type ip/config/all.
• Enter the default gateway or IP address in the address bar of your browser. Press Enter, the web interface will appear in the web browser window.
• The option to update the router will be in the Administration section with the name Update or Upgrade firmware.
• Locate the firmware update file you just downloaded.
• Click Update, wait for the firmware update process to finish.

Most people surf the net in search of multimedia files. To speed up this process, an additional Wi-Fi Multimedia (WMM) standard has been developed. Users must check the box "WMM Enable" in the router settings. You should activate this function if you want to use the Internet without restrictions, and this is provided for by your tariff plan.

The Windows operating system automatically selects the network interface parameters for accessing the Internet by default. A configuration with several network interfaces such as network cards is often used - several network cards are used simultaneously to connect to the Internet, to local network, the use of WiFi. To tell the system which interface to use and for what purposes, you must turn off automatic route discovery. To do this, each protocol must specify its own interface:

1. Open Start -> Control Panel -> Network and Sharing Center.
2. We find the Internet connection interface in the list, select Properties.
3. Select the Properties of the Internet Protocol version 4 we need.
4. On the "Advanced" tab, uncheck the Automatic metric assignment and set the serial number of the interface that will be selected for network requests, and more specifically for the Internet.
5. We perform a similar operation for all interfaces in ascending order.

Internet acceleration when choosing a DNS server

The speed at which sites load and download files depends on the DNS server that your computer accesses first. By checking the speed on the site speedtest.net, it is possible to change the server and notice the difference in the speed of receiving information. Most ISPs recommend that you set the TCP protocol settings to automatic DNS detection. It is not always the fastest server. To select a fast DNS server, use the DNSBench program found at https://www.grc.com/dns/benchmark.htm.

After downloading and running the program, you must perform the following steps:

1. Switch to the Nameservers tab, click the Add/Remove button.
2. Press the bottom button Build custom Nameserver List.
3. Switch to the Response Time tab, click the Run Benchmark button.
4. A window with multiple servers will open. The fastest will be at the top of the list. Select it and prescribe IP in the TCP settings.
5. Check your browser. If the download speed has not increased, you can roll back the changes.

Program to increase the speed of the Internet

To speed up the connection by optimizing system settings, use the AdvancedSystemCare program. To configure and redistribute traffic between protocols and applications, be sure to install FosSpeed. Combine different programs, methods, utilities. Most programs to improve computer performance, accelerator services for desktop computers, laptops, mobile devices free, downloaded online from software developers' websites.

TCP Optimizer utility

The capabilities of the computer when using the standard settings of the operating system and browser are not fully used. The operating system reserves part of the capacity for its service applications, Windows updates, and other cases. The TCP Optimizer utility will enable automatic tuning best conditions connections through:

• reset TCP / IP and Winsock;
• choosing default network settings;
• automatic calculation of optimal network parameters;
• ping and trace route to nodes in the network;
• calculation of the maximum transmitted packet (MTU);
• calculation of RWIN/BDP parameters, packet delay time;
• configuring network settings through the system registry.

Optimizing the connection is possible using the Internet Speed ​​Booster application. These are three utilities that provide:

• checking connection speed, ping, host;
• optimization of Windows modem and network settings;
• preventing file fragmentation;
• scheduling automatic RAM optimization;
• protection against threats on the Internet;
• setting up the Windows Registry to increase the speed of information exchange on the network;
• support for all types of connections: Dial-Up, LAN, ISDN, cable;
• simple help files;
• supported OS: Windows 8.1, 8, 10, Vista, 7, XP, bit depth: 64 bit, x86, 32 bit.

Proximodo Program

Loading a site is accompanied not only by pure html code, but also by hidden tags or javascript programs, URL masking, pop-up messages, etc. The Proximodo program is capable of acting as an intermediary between a website and your computer's browser. By adding exceptions in this program, you can change the settings, remove everything that slows down the site:

• advertising banners;
• delete cookies when closing the browser;
• enable caching for fast navigation by pages.

Video

However, there are things that have not changed since the advent of the Internet - Internet acceleration and traffic optimization. The problem is that despite the fact that in large cities there are no problems with speed, since leased lines, high-speed ADSL, 3G are used - in the regions the situation has not changed much. For example, ADSL with a speed of 128 Kbps costs the same as a leased line with a speed of 70 Mbps in Moscow. This makes people look for ways to speed up the internet.

So, Internet speed increase can be divided into active And passive way. The active method includes direct changes to the settings of devices and the operating system using programs or by editing the registry. The passive way to increase the speed of the Internet includes selecting and configuring a browser, setting up a firewall, etc. We will consider all these methods in this article.

Active ways to speed up the Internet

Let's start free internet acceleration with optimization the operating system itself. In the most common operating system that users use - Windows XP Pro - there is a small loophole. Service added to Windows XP QoS(Quality of Service). This service is used for specific functions and is not needed by most users. The fact is that QoS reserves 20% of the channel bandwidth for its tasks. In addition, you need to take into account that it does not matter what channel you have - regular Dual Up or gigabit Ethernet - 20% is reserved for QoS.

So the first thing we need to do is disable this service to free up the channel and increase internet speed. For this, we go to Start ->> Run, we type msconfig. In the menu that appears, select the tab Services, and look for QoS RSVP in the list. Then we turn it off.

However, that's not all. Now run the applet group policy, for this in Start ->> Run recruiting gpedit.msc, after which we select Local Сomputer policy, and there Administrative templates (Administrative templates). After that, select Network - QoS Packet Sheduler. In this menu, disable bandwidth limit, or reduce from 20% to 0. But we have not completely disabled QoS. Now let's go to device Manager, select "Show hidden devices", and there we delete the QoS devices. I want to make a reservation right away that many people say that QoS is a myth. Then check the ping with QoS enabled and disabled - you will see right away. And keep in mind to completely disable channel reservation - you need to complete all the steps.

Now, or set the modem's MTU value to 1492. This value is optimal for ADSL or a leased line. For a regular Dual Up modem, it is better to set the value to 576.

In principle, we have done everything to optimize the operating system to increase the speed of the Internet.
Now let's get to the software. To increase the speed of the Internet, various programs are used that perform various functions. For example, these programs are firewall monitors, which not only protect against hacking and information leakage, but also allow you to increase the speed of the Internet. There are also programs that allow you to compress information on a third-party server. Perhaps, let's start with firewall monitors or, in common people, a firewall (FireWall).

A firewall helps protect your computer from unauthorized access. However, it has features that allow you to speed up your internet. Such features, for example, include blocking pop-ups, ads, and other unnecessary nonsense that slows down the site loading speed. The fact is that many graphic elements have a lot of weight. As a rule, novice and non-professional designers, who are even capable of making mistakes in advertising banners, undertake the creation of banners. Of course, there is no question of optimizing images. As a result, images on banners are quite big size. Loading image data takes a large number of time. As you know, this slows down the loading speed of the site. Yes, there are plugins for browsers that help get rid of banners - banner cutters. However, these plugins have many disadvantages, while you can configure the firewall to the smallest detail.

So, consider setting up a firewall based on Agnitum Outpost. Agnitum Outpost is one of the best firewalls out there. Let's skip the security settings and go straight to the Outpost settings to speed up the Internet. So, first of all, we set up ad blocking. To do this, enter the text that will most often come across in banners and advertisements. Outpost has an extensive database of templates that you can easily use. In addition, you can adjust the sizes of the images that will be blocked. This menu contains all banner sizes, so setting this parameter will not take much time.

After setting up mail blocking, you can set up blocking of additional elements, such as Active X or Pop-Up.

We got rid of unnecessary images that slow down loading. Now a couple to use another program - now we will compress traffic.

So, there are a large number of programs for compressing traffic. These programs work as proxy servers. They contact servers, which in turn compress the traffic (35% - 70%). Accordingly, you save on traffic, and the page loading speed increases. Not only text information is compressed, but also graphic information.

However, almost all programs of this type paid. Of the free programs, it can be noted Toonel. Please note that this program requires the Java Virtual Machine to run. You can make sure that it is available at the address - C: ProgramFilesJava. If not, then just download it at - http://java.com/ru/download/windows_xpi.jsp?locale=ru and download the program. After that, we install Toonel and start configuring it.

Toonel allows you to compress traffic not only on the local server, but also on the remote one. Depending on the required option, we configure the program. In the example, let's focus on the local proxy server option:

hostname: 127.0.0.1
local port: 8080
web interface port: 7999
Don't forget to set the JPG compression.

Now you need to configure the programs whose traffic you are going to compress. Let's take a browser as an example. We go to the proxy server settings, and enter the data that we configured in Toonel.

After that, the program starts to compress the traffic. For traffic to be compressed, the program must work constantly. In a similar way, other programs are configured, the traffic of which needs to be compressed ...

So the active ways to speed up the Internet have ended. Now let's move on to the passive.

Passive ways to speed up the Internet

Passive ways to speed up the Internet include only browser settings. Moreover, you can only configure Opera 10, for everything else you need to do all the above steps. Firefox itself does not compress traffic, Opera, before version 10 compresses it slightly. All you can do with these browsers is disable images. However, this opportunity you should not turn it on, since many sites are incorrectly laid out, and simply do not load without images, or the text is invisible. Therefore, disabling images does not lead to the desired effect.

However, Opera 10 has a new option - Turbo. This option is similar to Toonel. So if you plan to use Opera 10 - Toonel can not be installed.

In this article, we looked at the main free ways to speed up the Internet. And everyone will decide for himself how to speed up the work of his network. The choice is yours.