The Uzbek people have traditional weapons that are popular far beyond the borders of Uzbekistan. Thanks to the raised tip of the blade and the narrow handle, the Uzbek knife is easily recognizable. The history of the appearance of this blade goes far into the past.

The first Uzbek knives were discovered during excavations of settlements and ancient burials on the territory of Uzbekistan. The specimens found were created in the 4th-14th centuries and represent a narrow blade with a smoothly rounded edge. Archaeologists and historians attribute this width to grinding as a result of use.

Uzbek knife it is customary to call it “pchak” (pichok, pichak), which means “knife” in Uzbek and some other languages ​​​​of the Turkic group. Pchak blades were distinguished by their versatility: they were used both in battle and in the household. On ancient knives, images with emblems of craftsmen who forged weapons have been preserved. Most often, the invariable symbols of Islam are found on the blades - the star and the crescent.

It is believed that the masters preferred to put on the blade a number of stars equal to the number of their sons.

Ancient blades were made in the oldest city Ferghana Valley- Chuste. This settlement was an ancient metal processing center. Traditionally, hereditary craftsmen were engaged in their production. In Soviet times, there was a knife factory in Chust, which is now closed. Later, pchaks began to be made in another ancient Uzbek city of Shakhrikhan. The production of ancient weapons is still concentrated in these cities, but now only private craftsmen make the pchak knife.

There is no historical evidence of the origin of the blade shape of the Uzbek knife, but there is a version according to which, in the time of Tamerlane, because of the fear of armed uprisings, the conquerors forced blacksmiths to forge blades with a rounded edge, since it is difficult to inflict a stab wound with such weapons.

Due to this feature, since the second half of the 20th century, the pchak has not been considered a melee weapon.

Kinds

Depending on the shape of the blade, Uzbek knives are divided into types presented in the table.

Advantages and disadvantages

The positive aspects of pchak explain its popularity among different categories of users. Knife Benefits:

1. Unusual appearance in oriental style. Such a blade immediately catches the eye.
2. Versatility. The product is indispensable in the kitchen, because with such a knife you can cut any food.
3. Long service life due to the ability of the blade not to become dull for a long time.

In addition to the positive aspects, the Uzbek pchak has a number of disadvantages:

1. The knife needs constant care, because when in contact with a humid environment, the blade quickly rusts.
2. In cases where the handle consists of two linings, a strip of cardboard is often laid between them inside, which can get wet with prolonged contact with water, so the knife cannot be soaked.
3. The price of the product is high. For a blade that can replace a whole arsenal of various devices, you will have to pay much more than for a set of classic kitchen knives.
4. A dull blade is difficult to sharpen at home; only a specialist can give it its former sharpness.

Despite the above disadvantages, the Uzbek knife is very popular with true connoisseurs of edged weapons.

Product Features

The Uzbek pchak has a peculiar appearance and a wide blade, which has a wedge-shaped cross section. At the point, the butt is narrowed. Since ancient times, the blade has been cast from both ordinary iron and high-quality steel. In cases where the knives were made of poor quality material, they were additionally treated with copper sulphate or clay.

On the blade, narrow valleys are traditionally cut, usually from above, parallel to the butt. Such elements do not have a functional purpose and carry only a symbolic function. The blade is usually decorated with an ornament, and the hilt with decorative inserts. The scabbard is made of leather or fabric with wooden inserts inside. Outside, the product is decorated with semi-precious as well as precious materials.

Blade

Depending on the purpose, the width and shape of the blade vary slightly:

• massive wide blades are suitable for chopping vegetables;
• medium universal models good for cutting bread, dough products;
• for processing fish, separating meat from bones, a long, narrow blade is suitable.

All of the above blade types have one common feature- a sharp line of rise from the butt to the tip.

Lever

The Uzbek pchak has a thin handle, its section has a rounded shape. It is attached at the level of the butt and expands towards the end. Sometimes a hook-shaped bend is made at the end of the handle, next to it there is a notch for the little finger or its imitation. The knife handle has specific part names.

The handle is of two types:

1. Yerma - consists of two overlays-dies, attached to the shank with rivets. Such a handle can be type-setting from various stones and other materials.
2. Sukhma is a one-piece handle inserted into the shank. Such a handle is most often made of horn, wood, silver, brass.

The handles are additionally decorated with national ornaments made of precious or semi-precious stones, metals, pieces of colored glass, and plastic.

Components of a knife

The difference between working and collectible models

Depending on the purpose, Uzbek pchaks are divided into working and collection ones. For working models intended for use on the farm, the strength of the blade and the degree of its sharpening are important. In the production of such blades, high-strength carbon steel is used, which is additionally oxidized to increase hardness.

Among the working models are common:

• naryn-pichok - intended for cutting dough and products from it;
• kassob pichok - used for slicing meat.

Blades of collection models are made of stainless steel. Particular attention is paid to the material of the handle, as well as its decoration: handles are complemented with inserts made of expensive wood, horn, bone, precious metals or stones. For collectors, the place where the knife was made is important, as evidenced by the tamga (stamp) on the blade, which is decorated with engraving and carving with plant motifs. The best souvenir pieces are richly decorated with expensive materials, as well as precious stones, their cost reaches several thousand dollars.

Souvenir knives, in addition to decorating collections, are used in national rituals and ceremonies. In particular, pchak is placed under the pillow if you want to conceive a child, since it is believed that in this case a boy will be born. So that the newborn does not cry, and also to protect him from dark forces, it is customary to place pchak under his pillow along with a piece of bread and peas.

Collectible

Care and sharpening

Pchak, which is constantly used in the kitchen, is best stored in a stand that ensures the absence of moisture. After each use, to prevent rust, wipe the blade dry and then lubricate with vegetable oil.

Common ways to sharpen at home are:

1. Sharpening with stone. First, the tool is sharpened with a rough bar, passing along it with the cutting edge forward. The blade must be positioned at an angle of approximately 20° to the surface of the bar, after which the tool must be ground.
2. Sharpening on musat. The tool is placed at an angle of 45 °, driven with pulling movements towards itself along the entire plane of the musat, always observing safety precautions.

The process of sharpening an Uzbek knife is complex and long. That is why it is advisable to turn to specialists to give the blade sharpness.

whetstone

Video

Hello! The topic of our conversation today is Uzbek national knives, namely - pchaks. One of the main features of these knives is that all of them not only have the status of household purposes, but are also widely used in the household, and often as kitchen knives. But have pchaks always had only household purposes? And what are their varieties? You will learn about this and much more by reading the article to the end.

Before we get started, I would like to recommend a great online gun shop RosImportWeapon, which has proven itself in the market from the best side and is the largest importer traumatic weapons and ammunition. You can get acquainted with the products by going to the catalog of traumatic pistols.

Pchaki: national pride and utility knife

Pchaki knives are of Uzbek origin. None of the researchers of edged weapons doubts this. This traditional and very distinctive Uzbek knife, which has a special decor, has been intensively cultivated in Uzbekistan for many hundreds of years.

Modern legislation has translated pchak from the category edged weapons into the category of knives household purpose. It is recognized that stabbing with a blade of this type is ineffective. To some extent, the creation of such a blade in antiquity, which could be a great look, remains a mystery. piercing bladed weapons, but was intended solely for business purposes.

Design features of the pchak

The appearance of the pchak is easily recognizable due to its unique structure and decorative ornament. The knife consists of a blade, handle and sheath. Pchak Blades usually have a dark color, usually gray, with a blue or yellow tint. In previous centuries, to achieve this effect, they were processed in a liquid solution of clay of a special composition.

Nowadays, for many pchak became nothing more than a household item. For many centuries, he was the subject of male and family pride, protector and helper. Pchaks were created by artisan cutlers, who were highly valued and traditionally lived in central regions cities of Asia.

The masters forged the blade of the pchak from steel, as a rule, of not very high quality. This was due to the massive demand for knives. Expensive ones were beyond the means of most townspeople. The master always put on high-quality blades seal — « tamga«.

A fairly wide pchak blade has a traditional wedge-shaped cross section. The butt tapers towards the tip. The width of the blade is emphasized by a thin handle, shifted upwards so that its upper side serves as a continuation of the butt line.

The blade of the Uzbek pchak is of three types. This is due to its economic purpose. The most common kaike shape universal and used by everyone. kaike point located on the butt line or slightly elevated above it.

Tolbarga shape resembles a willow leaf. This is how the Uzbek word is translated into Russian. In this type of blade, the butt slightly drops down when approaching the tip, i.e. the tip is located below the butt line. Such a knife is used by butchers when cutting carcasses.

third form blade, Kazakh preferred by fishermen. The line of the butt of the Kazakh from the middle of the length forms a smooth notch, rising to the point. Turning the knife over, it is convenient to remove the scales with this part of the blade with a notch.

Variety of pchak

The handle for knives is made of wood and is not decorated. Sometimes they put a colored ornament on " gulband". This pchak element is cast from tin directly on the knife during manufacture. Gulband serves as a section between the blade and the handle.

sop, pchak shank, repeats the shape of the handle, expanding towards the pommel - chakmok. At the end, a hook-shaped bend goes down. The shank breaks through several teshikov. These are the holes through which the rivets pass. They firmly fix the dice of the handle on both sides.

Before attaching the dies, a special narrow strip of copper or brass is soldered around the entire shank - brinch. On the handle pchaka always equipped with a small recess under the little finger. Small notches are also marked on the shank, near the blade, above and below, in order to gulband held on to the metal of the blade.

Hin, pchak sheath, usually performed from a piece of leather or sewn from dense matter. The seam was placed with back side along the axial line. The knife was deeply inserted into the sheath without additional fixation. To prevent cutting the scabbard, the craftsmen made wooden, internal safety inserts.

The history of the origin of pchak

Uzbek pchak knives occupy a special niche in the modern world of edged weapons. It means that they theoretically and historically relate to it, but this is not confirmed by law. At the same time, the history of the Pchaks is much older than some of their "relatives" of other nationalities.

The first examples of Uzbek pchakov belong to the 4th century BC. They are exhibited in museums as artifacts. The narrow blade of these ancient pchaks with a long and smooth rise to the point is striking. Scientists explain this by the fact that knives made of low-quality metal were actively used and worn off during use.

Volumetric archaeological material was found in the sands, during excavations of destroyed old cities or burial places of nomads. These finds date back to the 14th century and differ significantly from the first ancient pchaks. Their blades are versatile. They were ideal for use in the economy, and for use in combat. Since this period, the shape of the knife has not changed.

Pchak - symbol and ritual

Unlike our Russian superstitions, in the East it is customary to give knives for good luck. Sharp objects acquire the power of protective amulets in families, which will drive away misfortunes and illnesses. - not an exception. He was always credited with the power of a talisman. It is both an accessory used in national dances and an element social status. By the type of blade and the richness of the external decoration, one can accurately determine the position of the owner in the social hierarchy. The debate about the origin of the term and the sword itself is still ongoing among researchers.

Uzbek knife pchak (history of origin, working hypothesis).

Once upon a time in 1991, as a student at the Department of Archeology of Moscow State University, I went on an archaeological expedition organized by the Museum of Oriental Peoples to Samarkand. One of the first impressions that struck me then in the village near Samarkand were old people (babais) constantly meeting on the street in wadded robes (chapans), belted with a belt, on which one could often see a knife hanging in a sheath. As the "senior comrades" explained to me at the time, old people are allowed to walk the streets with a knife, because the knife is considered an element of the national costume. I gathered my courage and asked an old man to show me his knife. Not without pride, he took it out of its scabbard and showed it (in the village they knew that I was from an archaeological expedition and were treated with respect). I had never seen such an instance before. It was very unusual - a thin hilt at the base of the blade, expanding to the pommel (as if ending with a "head"), made of horn, and a straight wide blade with a smooth rise to the back, forming a rather sharp tip. The knife was polished so that I could see my reflection in it, and on its blade, closer to the handle, there was an ornament made in "Arabic script". The old man called it a pichok (knife) and said that I could buy the same one at the market on the outskirts of the city.

On the next weekend, I went to the market and after a long bargain with the seller, I became the owner of the largest copy of those that he had on the counter that day. After returning from the expedition, for many years I became the owner of a knife that all my friends envied.

Figure 1. Pchak from Samarkand, 1991.

Today, of course, things are different. Buying a pchak in Moscow is not a problem. But when buying pchak, many do not know what they are buying.

The history and origin of the pchak is hazy and confused.

Today, pchak is called the traditional national knife of the peoples living in Central Asia - Uzbeks and Uyghurs.

The specimens of the 19th-20th centuries closest to modern ones (ethnographic material that became known to modern science after the entry of Central Asia into the Russian Empire in the second half of the 19th century, obtained as a result of various expeditions), which are now presented in museums, show us a completely different type knife - with a narrow blade and a long and smooth rise to the point. Explain this shape of the blade simply. The blades of these pchaks are sharpened to the limit, and the change in shape occurred as a result of long-term practical use.

Archaeological data also do not give us an unambiguous answer to the question of the origin of the pchak: in Sogdiana (the territory covering modern Uzbekistan) in the 5th-8th centuries, two types of knives were common: 1. With a straight blade; 2.With curved blade. The maximum width of the blades of the found specimens is 1.8 cm, the stalk is lamellar with a narrowing from the blade to the tip (from 3 mm to 1 mm). All knives were of various sizes, with a total length of up to 14.5 cm, while the length of the handle, at the same time, was up to 3.5 cm. Both types were widespread and were found in large numbers in Penjikent, Kairagach, and Shahristan. (Yakubov Yu. "Early medieval settlements of the mountainous Sogd. Dushanbe, 1988, p. 235).

It is worth noting the extremely poor preservation of the finds (the climate and layers of Central Asia are merciless to iron), which makes typology extremely difficult.

Figure 2. Images of found knives that date back to the 5th-8th centuries (numbers 4-6).

There are also archaeological data on knives found in the burials of nomads in Central Asia, dating back to the last quarter of the 14th century. These "Standard Utility Blade Design" knives represent a remarkably durable, consistent series. They have the following characteristics. The back of the blades forms a weakly pronounced arc, smoothly descending towards the nose. The cutting edge is arcuate, but steeper than the back. The central axis of the blade and handle is shifted towards the back. The length of the blades ranges from 6 to 14 cm. The thickness is 1.5 mm, the width of the blade at the base is 1-1.5 cm (depending on the length). The handle is subtriangular in shape, 2-4 cm long. The width of the handle at the base is about half the width of the blade. The ratio of the length of the blade to the length of the handle is slightly more than 3:1.

The handle is always separated from the blade by strictly perpendicular ledges, which are structural features. A narrow - 1.5-2 mm wide and thick iron clip was welded to the base of the blade, which is a kind of lock that locks the knife in the sheath. This is a very fragile, often unpreserved part. Its presence is evidenced by the strict perpendicularity of the ledges and the traces imprinted by it, which can be seen on the unrestored metal.

The knives also had a wooden scabbard, which is fixed by traces of wood on the blades.
This type The knife was widely distributed among nomads already at the end of the first millennium AD.

Illustration 3. Image of nomad knives in the last quarter of the 1st millennium, type 3 according to Minasyan.

All mentioned types of knives have nothing to do with the current form of pchak. It is not yet possible to answer when and under what circumstances the hilt shank rose to the line of the back of the blade so that the hilt stalk is located in the upper third of the blade, and what it was connected with.
That is, ancient copies of knives show us a completely different structural type. The emergence of the modern type of pchak can be explained by the fact that it was introduced from outside or existed in the region, but such knives are still unknown and not described.

On the Internet there is an opinion about the appearance of knives similar shape in Central Asia in the XIV-XV centuries. Their appearance is partly associated with the conquest of Asia by Tamerlane and "an indirect ban on local men to carry weapons / daggers." The authorities could not deprive the Uzbeks of the right to carry weapons, and the most common type of weapons, due to their availability, were knives or daggers. This is an age-old tradition, sacredly revered in the East. And then they turned to the pichakchik artisans (knife artisans), who were "convinced" to change the design of the knife for the population, turning it into a household item. To compensate for the loss of the combat qualities of the knife, Uzbek craftsmen turned to the external form. This is how new form hilt, very reminiscent of the hilt of a saber or card.

Changing the form simultaneously solved another problem - in the fights with knives (in Uzbek "pichakbozlik"), the opponents tried not to kill, but only to injure, otherwise it was supposed to pay the relatives of the victim a large "khun" for the murder - a ransom for blood. The emerging shape of the knife reduced the likelihood lethal outcome in such knife fights.

But given point of vision does not have full-fledged reasonable sources, transitional/early forms of pchaks are unknown.

It is possible to consider a hypothesis about the independent development of the pchak, which was originally an exclusively household (kitchen, cook, table) item and appeared in Central Asia under external influence, but so far its early finds are unknown.

It should be said right away that the typological form of the pchak (one line of the back and the handle) is found in different cultures, in different eras and refers, first of all, to knives for household (kitchen) purposes. For example, bronze knives of the Karasuk type.

Figure 4. Karasuk knives. (D.A. Avdusin, "Fundamentals of archeology")

Another example is the knives of the first millennium. of Eastern Europe, which are characterized by a smooth line of transition from the back to the stalk with a slight "top" in the central part. A stalk in the form of a narrow triangle 4-5 cm long, as a rule, is separated from the side of the cutting edge by a smooth ledge. The cutting edge of whole specimens of such knives is straight and only towards the end is bent upwards.

Figure 5. Knives with a "blade back turning into a stalk without ledges", type 1 according to Minasyan.

Direct transitions of the line of the back of the blade (butt) into the handle are also found on Russian "table / kitchen" knives of the XV-XVI centuries from Zaryadye (Moscow).

Illustration 6. Knives from Zaryadye, dating back to the 16th-17th centuries.

A typologically similar knife shape is found even on the other side of the globe - gaucho knives in Argentina.

Figure 7. Gaucho knife from Argentina.

Finally, if we turn to the present, we immediately recall Japanese kitchen / chef's knives, which also have a configuration similar to the pchak, with thin handles and a direct transition from the back of the blade (butt) to the handle.

One cannot fail to say that Central Asia is a vast territory through which in ancient times the “Great silk road”from China, trade relations were carried out with India and the countries of the Mediterranean. This land is saturated historical events. Today we learn about them from the writings of ancient Greek and Roman authors, medieval manuscripts of Arab scribes, discovered archaeological sites.
At the dawn of human history, until the 4th century AD, empires were created and collapsed on the territory of Central Asia: Persian, Alexander the Great and the Seleucids. The Greco-Bactrian, Krishan and Parthian kingdoms existed and disappeared. Later, part of these lands was part of the Sassanid state, in the Arab Caliphate. In the XI-XIII centuries. no less powerful states arose on these lands: the Ghaznavids, Karahnids, Ghurids and Khorezmshahs.

After the conquest of this territory by the Mongols, the Chagatai Khanate was formed, and then the huge power of Timur and his descendants.

The lands of Central Asia became the homeland of many Turkic nomadic tribes engaged in cattle breeding. But this is also the place where the most ancient agricultural cultures appeared.
Located at the crossroads of trade and migration routes, there has always been a cultural influence from the outside: the influence of nomads from the eastern degrees, the influence of Iranian (Persian) culture from Asia Minor (Persia), the Hellenistic influence, the influence of the cultures of India and China.

Undoubtedly, similar forms/types of knives of Indo-Iranian and Turkic origin - Iranian kard, Turkish bichag, Indo-Iranian peshkabz, chura, karud and khayber, Indian kirpan - influenced the appearance of the pchak among the Uzbeks. All these knives are more often dated no earlier than the 16th, or even the 17th-18th centuries, only peshkabs are sometimes attributed to the 15th century.
At the end of the "historical review", one can make an assumption about the emergence of pchaks already after the 15th century under the influence of the Indo-Iranian tradition with a "hard functional purpose" - a kitchen/chef's knife. The owners of pchaks are well aware of how great they are for cutting meat and vegetables.
But for Uzbeks, this is not just a good kitchen knife, but also a wonderful gift for a man, which has a sacred meaning. Edged weapons are an indispensable attribute of national clothing among many peoples of the East. Even those who, due to their social status, do not have the right to own long-bladed weapons (farmers and artisans), wear a knife in a sheath on their belt.

In contrast to the superstition that prevails among us that it is impossible to give knives (it supposedly brings misfortune), in Central Asia such a gift is still considered prestigious and desirable. According to the ideas of the peoples of Central Asia, sharp and pointed objects acquire the power of protective amulets that drive away misfortune and disease. And the pchak is also credited with a similar power of a talisman. A knife placed under the pillow in the head of an infant is considered a means of protecting his health. If an adult falls ill, a knife can be put on his head instead of a compress, thus protecting him from the action of evil forces.

A pchak presented by a son to his father demonstrates great attention and love, and such a gift is considered a great honor for the father.

The knife is also given to a “real dzhigit”, to each potential warrior - a young man who has reached the age of 18.
Most often, knives (household, not weapons), as elements of national clothing, are found among nomadic cattle breeders and hunters - North American Indians, the Argentine people of Gaucho, Yakuts, Buryats, Laplanders.

And in the case of pchak, there is a direct influence of the Turkic-speaking nomadic peoples who came in the Middle Ages to the territory of settled farmers - the Uzbeks.
In this part of the review, some aspects of the origin and purpose of the pchak were considered. In the second part, we will talk about the design and types of the modern pchak knife.

PCHAK and KORD

Uzbek, Uighur, Tajik

With all the abundance of information, there is apparently no exact answer to the question of what is considered the “correct” pchak or cord. It is not even clear how the pchak differs from the cord and whether it differs at all ... (after all, both of them, translated from the national language, simply mean “KNIFE”). But there is also an Iranian card ...

Let's start simple. These photographs depict a knife that any person who is at least somehow interested in knives or who has been to Central Asia will call “PCHAK”, or, in Uzbek, “PICHOK”. The appearance of the pchak is peculiar and easily recognizable.

This is the most common pchak with a kaike blade. Such a blade involves raising the tip above the line of the butt by 3-8 mm. More advanced and inquisitive people will say that this is the Andijan Pchak. Someone else will add: "Sharkhon."

The pchak blade itself is traditionally forged from carbon steel (in ancient times, broken weapons or iron ingots from India were used, from the 19-20th century automobile springs, bearing cages and other improvised materials were used, now factory-made steel bars of the ShKh type are most often used -15, U12, 65G or cheap fittings from St3). In Uzbekistan, they still say: “Pichok made of carbon is for work, made of stainless steel is for decoration!”

If the blade is made of high-carbon tool (U12) or bearing (ШХ15) steels (which allows you to get a better product), then St3 shanks are usually welded to it, which is noticeable in the form of a triangle near the pchak handle.

By the way, many Japanese and Russian masters do the same, for example, G.K. Prokopenkov. This is due to the fact that U12 and ShKh15 have low impact strength and strength, and if the blade and shank are forged from a single piece of steel, there is a high probability of the blade breaking in the neck area, for example, when falling.

The length of the blade is usually 16-22 cm, the thickness always decreases wedge-shaped from the handle to the point, and at the handle it can be 4-5 mm. In cross section, the blade of the pchak also tapers wedge-shaped from the butt to the blade. The slopes are usually straight, rarely convex or concave lenticular. Blade width can be up to 50 mm. All this together gives a good geometry of the knife and provides an effective cut of any food products.

As already mentioned, carbon steel is used on pchaks, from what is at hand, hardening (as a rule, zone - only at the cutting edge) is usually carried out up to 50-52 Rockwell units, less often up to 54-56, and then only in Lately. On the one hand, a hardness of 50-54 units does not allow long-term retention of the sharpness of the cutting edge, but it allows you to edit such a knife on anything (the bottom of a ceramic bowl is usually used, but there are also special stones of a traditional shape for dressing pchaks and scissors), which, of course, is a big plus. But in this case, the knife quickly wears off and turns almost into an awl, so you have to buy a new one. Although the cost of pchaks (not souvenir ones) has always been small.

Recently, more and more often there are pchaks made of ShKh-15 steel, which can be hardened up to 60 Rockwell units, which we see on some blades. Such hard blades are made specifically for the Russian and Ukrainian market in order to compete with Japanese kitchen knives. From my point of view, such hardness is not very justified, because pchaks have a very thin reduction and working with such knives requires certain skills and special equipment, otherwise the blade will crumble and break (similar to Japanese kitchen workers) On the other hand, heat ShKh-15 to 50- 52 units (the norm for a pchak) does not make much sense - just a translation of good material.

The surface of blades made of carbon steels is usually oxidized (burnished), immersed in a solution of Naukat clay (traditionally), ferrous sulfate or ferric chloride, due to which the blade acquires a dark gray color with a blue or yellow tint, and is decorated with a fuller (“komalak”, moreover if there is only one dol, then it will definitely be from the side of the tamga), stamped with a brand (“tamga”) or engraved. The knocked-out recesses are filled with brass. On carbon blades, a hardening zone is often noticeable.

The names of the parts of the pchak are presented below:

"GULBAND", or bolster, is cast from low-melting tin or tin-lead alloys, soldered from sheet brass or cupronickel and filled with tin or its alloy. I note that the use of lead in cooking is not good, and it is advisable not to use leaded knives (or at least varnish them). You can distinguish lead by trying it with a soldering iron (lead melts worse), it is highly oxidized, acquiring a dark gray tint, and gets dirty (like newsprint). It seems to me personally that the use of lead and alloys is the cost of the easy availability of old car batteries and bearing babbits.

They decorate the gulband with engraving (traditionally, with the Uzbek floral ornament “islimi”), often with filling the recesses with enamel paint (black, red, green), as well as inserts of mother-of-pearl (“sadaf”), turquoise or rhinestones.

"BRINCH" - a strip of sheet brass or cupronickel, up to one millimeter thick, soldered along the perimeter of the shank during surface mounting of the handle ("erma dosta"). Handles are riveted to the brinch, decorated with engraving and decorative oxidation. I note that usually the brinch protrudes beyond the shank by 1-2 mm, and there is an air gap between the linings and the shank.

The meaning of this action is not very clear, except to save the material of the overlays when expensive material is used (for example, ivory). Perhaps this design allows you to dampen the stress in the handle, because. the same installation is traditionally used in the handles of Central Asian sabers (filling the air cavities with mastic).

"CHAKMOK" or pommel.

A specially made and decorated pommel is used on expensive pchaks with surface mounting (“yorma dosta”), in the form of metal pritins, or mounted mounting of handles (“sukma dosta”) from a hollow horn, in this case it is performed by soldering from cupronickel, brass.

Decorate with engraving, sadaf, rhinestones.

On inexpensive pchaks, chakmok is designated by changing the cross section of the handle (from rounded to rectangular) and / or the presence of a beak-shaped protrusion.

"DOSTA" - black, handle.

For manufacturing, local wood (apricot, plane tree), textolite, plexiglass, bones, horns are used, soldered from sheet metal (cupronickel, brass)

Wood, textolite and bone are usually not decorated, colored “eyes” and wire are inserted into plexiglass, the horn is decorated with decorative carnations, sadaf inserts or rhinestones, engraving is applied to metal handles, usually in the form of a floral, floral (“chilmikh guli”) ornament with adding rhinestones.

Handle shank with surface mounting ("erma dosta") usually has the same thickness in gulband and chakmok, rarely thickens towards chakmok. Often the thickness of such a handle exceeds its width - this is convenient for traditional cutting of vegetables in the preparation of Uzbek dishes: pilaf, salads "chuchuk", or "shakarob"

"TAMGA" - brand

As a rule, each craftsman (“usto”) who produces any product (especially knives) uses a workshop brand (tamga).

For Uzbek masters in the center of the tamga, a crescent is usually used (as a symbol of faith), stars are often used (they say that their number used to indicate the number of children-heirs or students who became masters) and the symbol of cotton.

Anything can be found on modern hallmarks - even the image of a car.

It should be noted that at present it is impossible to fully rely on the tamga to identify the master. I saw a tamga used by at least four different masters(although maybe one does, but different people sell on their own behalf).

As with any household knife, a sheath is required for a pchak. As a rule, they do not differ in good materials and workmanship. Today, it is usually leatherette with cardboard inserts, sometimes decorated with appliqué and imitation beads.

More expensive pchaks may have a leather scabbard decorated with embossed or woven leather cord.

Rarely there are metal scabbards (melchior, brass) with engraving or combined ones (leather, wood, metal).

At the end of the review of the Andijan pchak, I will quote from O. Zubov’s article “The Sign of the Master” (magazine “Vokrug sveta” No. 11, 1979):

“... Wide, ringing with a black and purple tint, inlaid with red, green, blue and white pebbles - specks, three stars and the moon shine on the blade - the ancient brand of the Abdullayevs.

This knife is an indispensable assistant at a meal with friends, an integral part of Uzbek cuisine.“You can cut bread, you can peel potatoes, or you can hang it on the carpet and watch - you can do anything!” - said the master. And, after a pause, he smiled: “But the best thing is to cut a melon!”

Considering the Uzbek pchaks, willy-nilly one wonders what led to the appearance of just such a form of blade. The fact is that this form is suitable exclusively for cooking, while the neighboring peoples had a typical knife that could somehow be protected and used for other (non-cooking) needs, that is, they were used all over the world more versatile knives. The Uzbeks also had such knives, but ... only until the 14th century. The exact reason for the emergence of this form is not known, but if we recall that the 14th century is the century of the empire of Timur (Tamerlane), an empire with centralized power and strict laws, then we can assume that Timur's officials, or himself, were somewhat concerned about the subjugation of the conquered peoples , and, in order to prevent the appearance of edged weapons among the people, they took all the gunsmiths to the Shah's forges, to the capital of the empire, Samarkand, and for the civilian population they forced the craftsmen to make knives with a point raised up. It is almost impossible to inflict stab wounds with such a knife, and, therefore, the danger of an uprising and other “terror attacks” is reduced. Recall that in the days of another empire, already close to us in time, pchaks also did not belong to edged weapons precisely because of the shape of the blade, and for their manufacture they were not sent to places not so remote. Although there may be other versions. In any case, it turned out to be a very convenient knife for cooking, which quickly gained popularity in Central Asia. If it were not convenient, it would not have received such distribution!

In addition to pchaks with a “kaike” blade, there are pchaks with a “tugri” blade, that is, with a straight butt.

Let's compare two types of blades: the photo below clearly shows the difference between the blade "tugri" (above) and "kaike" (below)

The blade "tugri" has a constant or decreasing width towards the tip. Convenient for slicing meat, usually included in the butcher's kit ("kassob pichok").

In addition to the already mentioned "Andijan" pchak, one can come across the names "Old Bukhara" and "Old Kand".

In the "Old Bukhara" blade evenly narrows to the point, the rise is less pronounced, but the entire blade is often arched, the blade is more specialized for meat work - skinning, deboning.

Interestingly, to this day, the narrow Bukhara pchaks are often called "Afghan", although there is a difference between the pchaks from Bukhara and Afghanistan - on the "Bukhara" rivets go in one row, and on the "Afghan" - a half-envelope.

Also, traditionally Bukhara pchaks have a sheath with a ball or leaf at the end.

"Starokandsky" - the blade of this pchak is distinguished by its small width, most likely used as an auxiliary when deboning or peeling vegetables.

You can also meet the names "tolbargi" (willow leaf) and "kazakhcha". These are functional highly specialized knives designed to perform a specific job.

"Tolbargi" - a butcher's knife for butchering animal carcasses,

"Kazakhcha" - for cutting fish.

Pchaks "Kazakhcha" were distributed mostly among the inhabitants (fishermen) of the coast of the Aral Sea, mainly Kazakhs.

The line of the “Kazakhchi” butt approximately one third to the point forms a smooth notch, again rising to the point, located on the butt-handle line. The recess is sharpened on one or both sides. With a blade of this shape, turning the knife over, it is easy to clean and gut the fish.

The handles of the "tolbargi" and "kazakhcha" are usually made of wood and, as a rule, are not decorated (only the presence of a colored ornament on the gulband is allowed).

Here is a photo of the knives of the master Mamurjon Makhmudov from the city of Kokand:

"Tolbargi"

Well, another photo of knives from Tashkent

Photo from the Museum of Applied Arts of Uzbekistan, the selection is called "Tashkent 1985"

The Uigur pchaks deserve special mention. These are knives from XUAR (Xinjiang Uyghur Autonomous Region of China). Sometimes the name Yangisar knives is found - the name was fixed in the center of production - the city of Yangisar. They also have the "Old Bukhara type-Afghan" and "Old Kandish", but if you look at the photos, you can see the differences. The higher quality (and beautiful) manufacture of handles and the absence of a cast gulband (bolster) made of tin are striking, the blade shanks are almost always open, the brinch is not used. But the blades are often processed roughly, or not sharpened at all, because. the production of Uyghur knives with sharpened blades longer than 200 mm is prohibited by Chinese law!

Starobukharsky. Uyghur masters

Afghan. Uighur masters.

Starokandsky. Uighur masters.

If the Uzbek pchaks are more specialized for cooking, then the Tajik KORDs are more versatile knives.

Cords come in three typical sizes. The most common(the most working) has a length of 14-17 cm, big knife"Gov kushi" ("cow cutter") is used for slaughtering cattle and has a length of 18-25 cm and the smallest knives (less than 14 cm) are for women.

The blades of traditional cords are powerful, up to 4 mm thick at the guard (I note that if the thickness of the knife blade is more than 2.4 mm, then it can already be considered as a melee weapon and is prohibited for free circulation), lenticular slopes from the butt or the middle of the blade width, less often direct (in Uzbek pchaks usually vice versa). The cutting edge is displayed on each knife, depending on the purpose. The butt of the cord blade, as a rule, machined from a finished strip of metal, is straight and parallel, and not wedge-shaped, like a pchak. On the blade, valleys are usually machined, one or two on each side, or two on the right and one on the left.

Installation depends on the area of ​​manufacture. In the southeastern mountainous regions, preference is given to mounted installation, and in the western and northern regions, which are closer to Uzbekistan, to overhead installation. Moreover, the overhead installation of the cord is somewhat different from that of the pchak: a brazed brinch is not used, and the entire shank is poured around the perimeter with a tin alloy, so the handle on the pchak is lighter, and on the cord it is stronger! In general, the device for cords is only cast, made of tin and its alloys (or silver), the ornament is only engraved and more geometric, radially symmetrical, in contrast to the complex-vegetative Uzbek "islimi". The ornament is individual for each master and can replace the stigma (the cords are traditionally not stigmatized, at least on the blade, on the guard - a certain ornament or stigma)

The overhead handles of the cords are always wider than those of the pchaks, they expand towards the pommel and have a characteristic notch for the little finger.

Horn, bone, wood, plastic go to the handle of the cord. When mounted or overhead mounting, the cord blade shank is always full for the entire length of the handle (with the exception of small knives for women in the kitchen).

Photo from the Museum of Applied Arts of Uzbekistan, the selection is called "Khorezm, Khiva. 1958"

I would like to once again dwell on the terminology - pchak, pichok, bull, cord, card.

The fact is that some time ago I got a knife somewhere in the 17th-18th century

Length 310mm, blade length 185mm, butt width 30mm, butt thickness (3.5-2.5-1.5)mm. The purpose of the groove on the butt is not clear to me, except perhaps to increase the thickness of the butt, which slightly increases when the groove is minted. The yellow metal in the ornament is gold. Hardness about 52 units. I was struck by the blade system (as the well-known cutler Gennady Prokopenkov put it, “just aerobatics!”):- a wedge from the butt with a concave lens, and turning into a drop-shaped view a few millimeters (from 3 to 5) from the cutting edge. Of course, this is all - tenths of a millimeter, but everything is visible and palpable. After some persuasion, G.K. Prokopenkov agreed to make me a modern copy, preserving the entire blade structure as much as possible.

Here is the knife:

It turned out that when working in the kitchen, it surpasses almost all the knives I have - both in terms of cut quality and ease of use. Well, it’s easy to edit anything (even musat, even ceramics). Although if you chop vegetables for a long time, that is, on a stream, a good chef will apparently be more convenient. But for home...

In addition, its design allows you to cut off / cut the stick and protect yourself from any evil spirit.

That is, we got an excellent wagon.

Naturally, the question arose about the type of knife. There were two options - card or pchak. The cord was not considered for obvious signs. Based on the materials of the Internet and, in particular, the RusKnife conference, the Bukhara knife turned out to be the closest.

Knife from Bukhara. Museum of Artillery, Engineering Troops and Signal Corps. Exhibition "Weapons of the East 16-19 centuries"

I note that the "museum" exhibit is named simply -"Knife from Bukhara"

Further searches resulted in the following photos:

Pchak is old. Bukhara

Pchak. Bukhara.

Bukhara card

Bukhara card

Pchak Bukhara with turquoise

Pchak Afghanistan

Persian card

Note that on last photo knife (Persian card) has an armor-piercing thickening on the tip.

Thus, it is apparently not possible to determine exactly the type of my knife.

From the point of view of collectors and connoisseurs of edged weapons, a card is a knife created primarily for military purposes: it looks more like a stylet and its edge, as a rule, is strengthened.

So I think that I have a pchak. Tugri-pchak, most likely, of Bukhara production.

However, I am most impressed with the position of Marat Suleymanov, who claims that card, cord and pchak are not brands at all, but simply the names of one product - a knife - on different languages("pechak" - in Tatar, "pichok" - in Uzbek, "pshah" - in Azerbaijani, "kord" - in Tajik, "kard" - in Persian. Kard and cord are close in sound, since Tajiks and Persians (Iranians) belong to one language group, Uzbeks, Tatars, Azerbaijanis - to another, Turkic)

There is also a "bull" - a Karachay knife (see the article "Bychak - the knife of every Karachay" on this site), but the Karachays and their closest relatives, the Balkars, are also known to be Turkic-speaking peoples.

There are also knives of the Turkmen-Saryks (photo from Rusknife)

Thus, without touching on military topics, it seems most correct to say:

National Uzbek knife (pichok, or pchak)

National Tajik knife (cord)

National Uighur knife (pchak)

National Karachai knife (bull)

Here is another photo from the “Turkestan Album” 1871-1872

Samarkand, Pichak Bazaar(By the way, the original says “Pisyak Bazaar”)

In previous years, Uzbek pchaks came to the European part of the USSR in the form of single specimens, most often they were brought from expeditions in Central Asia. As a rule, their quality was not at a high level.

Since the end of the 90s of the last century, the Soyuzspetsosnaschenie company began regular deliveries of Uzbek pchaks to Russia, and it became possible to purchase them at the company's office or in retail. Currently, they can be purchased in many knife stores and oriental culinary stores, including online stores (in particular, in Dukan Vostoka, Pchak-knives self made", and so on.).

At first, suppliers bought pchaks in bulk at the bazaars in Uzbekistan, so it was impossible to find out either the name of the master or the place of manufacture from the sellers. As the market saturated, the trade began to "civilize", and now you can buy pchak made by a particular master (especially from those sellers who buy products directly from the masters), and choose the type, style and materials of the blade and handle.

At times Soviet Union The most popular were pchaks from the city of Chust, where there was the only knife factory in Uzbekistan.

Photo from the Museum of Applied Arts of Uzbekistan, the selection is called "Chust 1987"

At present, the bulk of Uzbek pchaks are produced in the city of Shakhrikhon, Andijan region of Uzbekistan, where there is a whole urban area (“makhalla”) of cutlers (“pichokchi”), in which entire family dynasties of blacksmiths and pchak fitters work.

Photo from the Museum of Applied Arts of Uzbekistan, the selection is called "Shahrikhon 1999"

Thus, the famous craftsman Komiljon Yusupov, who devoted more than 50 years of his life to his craft, and was elected the elder of the mahalla pichokchi of Shakhrikhon, passed on his art to his sons and now the brothers can make, if they wish, very good products.

Usto Bakhrom Yusupov

Usto Bakhrom Yusupov

In other regions of Uzbekistan, individual craftsmen (“usto”) and pichakchi families also live and work, but their products are much less common. For example, the Abdullayev family, who lives and works in Bukhara, also makes pchaks, but their true “horse” is hand-forged scissors for various purposes, famous throughout Uzbekistan.

Related to the Uzbek pchaks, Tajik knives (“cords”) are mainly produced in the city of Istaravshan (former Ura-Tyube).

Also, stands with pchaks and cords are always present. at various knife exhibitions: "Blade", "Arsenal", "Hunting and Fishing" and others ...

Usto Abduvahob and his knives:

The director of the store "Dukan Vostoka" Bakhriddin Nasyrov with Uzbek masters - "usto": usto Ulugbek, usto Abdurashid, usto Abduvakhob.

Usto Ulugbek

Usto Abdurashid

Usto Abdurashid

Both pchaks and cords are made by hand, and it is safe to say that each such knife carries a particle of the master's soul.

Already with an external examination, you can judge the level of quality of the knife:

A good build and blade processing, a pronounced hardening line and a thin cutting edge allow you to count on a good and long cut;

Well soldered or cast from pure tin (light and shiny) gulband allows you to use pchak or cord in the kitchen without the risk of lead poisoning;

A clean and long ringing after clicking on the blade, the absence of a shank at the saddle handle indicates a high-quality assembly;

The absence of gaps between the device and the handle, or cracks in the handle handle prevents the reproduction of microorganisms in them;

If possible, pchak and cord, like any other tool for work, need to be selected “by touch” so that it becomes a “natural extension of the hand”.

The only (today) pchaks that cannot be faulted are the pchaks of Mamirjon Saidakhunov

Blade 140x4mm at the butt, evenly descends to the spout. Reduced to zero, the double-sided lens is light, sharpened perfectly. Powdered steel DI-90, heat in the oven, 61 hardening somewhere. Handle 110mm, walrus bone. Gulband is a hard alloy based on tin. The food cuts brutally, the tree cuts dry, the chicken cheerfully butchers. Sheath: 3mm leather, water resistant

True, there is a small nuance - the master lives and works in Ukraine and the price for this knife is quite high (compared to other pchaks)

To date, more than 30 knives from Shakhrikhon, Samarkand, Tashkent and so on are presented in Russia...

In addition, such knives could not fail to interest Russian manufacturers.

So, at the request of their customers, they make pchaks:

Gennady Prokopenkov

We can see this knife almost every weekend on the NTV channel in the hands of Stalik Khankishiev. Fiber composite based on 40X13, hardened up to 52-54

Dmitry Pogorelov

Steel CPM 3V, HRC - about 60. Length 280 mm, blade length 150 mm, width 33 mm, thickness (3.5-2.5-1.5) mm, weight 135g. Handle -cocobolo Zeroing, excellent cut

Mezhov's workshop

Knife of S. Kutergin and M. Nesterov

H12MF steel, silver, rosewood, rosewood, bone. Knife length 280mm, blade 160mm, width 40mm, thickness 4mm, HRC 57-59

But even from the photograph it is clear that the mixing is by no means "Pchakovsky"

Zlatoust gunsmiths

Steel 95X18, HRC 58, length 292 mm, blade 160 mm, width 35 mm, thickness (2.2-2.0-1.8) mm, weight 120 g. Convergence is about 0.3 mm. The handle is walnut. Despite the small thickness and good reduction, the cut of this knife leaves much to be desired.

Gunsmith

Damascus, gilding. Length 260 mm, blade 160 mm, width 35 mm, thickness (4.0-3.5-2.0) mm, weight 140g. HRC is about 56. Convergence is about 0.2-0.3 mm.

Despite the various decorations, the cut is much better than the previous AiR.

A little testing showed predictable results - first Prokopenkov with Pogorelov, then Oruzheinik and then A&R by a wide margin.

It is interesting that the usual pchak (see photo) proved to be slightly worse than the pchaks of our eminent masters (in terms of cut quality), but better than the Gunsmith, but not by much.

In the middle of the last century, knives similar to pchak were made by the German company Herder, but I could not find out its specialization

Of course, a pchak, even a good one, is difficult to compare in terms of manufacturability and hygiene with a European chef, and in modern food production it will be less convenient, but in a home kitchen and especially somewhere in nature, this knife can give you a lot of pleasure!

For a more complete picture of the work of the pchak, I recommend that you read Roman Dmitriev’s review “Pchaks in real life" on that website.

Great help in writing the article was provided by Marat Suleymanov, Roman Dmitriev and the forum "RusKnife"

Special thanks for providing photos to Bakhriddin Nasyrov ("Dukan of the East") and Alexander Mordvin ("Pchak - handmade knives")

P.S. review by Roman Dmitriev "Pchaki in real life" will appear in the near future

Of great interest to collectors is the Uzbek knife, which is versatile in use, has a richly decorated handle and good quality manufacturing. Such a chic blade will become great gift for everyone who appreciates melee weapons. To date, many varieties of pchak are known - from knives for use in the kitchen, to richly decorated models for collectors.

Description of the knife

The Uzbek knife, or as it is also called pchak, is a traditional weapon of the Central Asian peoples, with a wide blade of an unusual shape and one-sided sharpening. Such blades are made of high-strength carbon steel, the handle can be made of wood, metal, horns or bones of exotic animals. The pchak is worn in a straight wide leather scabbard and is popular in the countries of Central Asia, where there are numerous variations of this weapon, which differ in the proportion of the blade and ornament.

Blade features include:

• Unusual blade shape.
• One-sided sharpening.
• Wooden and bone handle.
• Richly decorated handle.

The length of the Uzbek pchak is usually 12-27 cm. The thickness of the handle is 6-7 mm. The cross section of the blade usually tapers from the butt to the blade. The original blade geometry makes it easy to cut products, while the blade is perfectly balanced. It has optimal weight characteristics, fits comfortably in the hand, and thanks to the extended handle, it will suit people with large and medium-sized palms.

History of creation

Uzbek pchak is a modified Asian knife, which was known as early as the 4th century BC. In the future, several varieties of such weapons became widespread, the most popular of which was the pchak. Such a blade is extremely effective, versatile in use and at the same time has an attractive appearance. With equal success, this weapon can be used both in everyday life in the kitchen and considered as a combat one.

According to one version, such weapons with the original shape of the blade appeared during the conquest of Uzbekistan and the whole country by the Russian Empire. Central Asia. The new authorities, fearing unrest and rebellions among the local population, forbade them various types of edged weapons. The unusual shape of the blade made it possible to use the knife exclusively for cooking or at home, but such a blade was not suitable for use in combat purposes, it was allowed only in Asia and the Caucasus.

Today, the most popular are decorative models that have rich carvings on the blade and original handles made of bone or horns of exotic animals. Previously, Uzbek knives, which were made by craftsmen by hand, were considered the highest quality and most expensive. Such weapons are made by the largest weapons workshops, which follow a centuries-old tradition, observing all the proportions and features of the classic pchak.

Advantages and disadvantages

Collectors value Uzbek knives for their incredible beauty and energy. The best examples can cost several thousand dollars, they are made by famous craftsmen and are real works of art.

The advantages of these knives include the following:

• Versatility of use.
• Stylish appearance.
• Durability and strength.

The disadvantage of such blades is the difficulty of sharpening, as well as the need for proper care of the weapon. So, pchak does not tolerate water well, so the surface of the blade should be wiped dry, which eliminates the formation of rust. It is also necessary to take into account the high cost of such knives, which can reach 50,000 rubles or more.

Design features

A feature of this knife is the handle and the method of attaching decorative overlays to the blade. It is on the execution of the handle that the craftsmen spend most of their time and effort. A real Uzbek knife is made exclusively with a handle made of wood or bone. Models made from the horns of rare animals are also valued. Various inlays of expensive materials, precious metals and jewelry stones can be used as decoration. The cost of such a knife will directly depend on the complexity of the handle and the materials used for decoration.

The classic drawing of a pchak knife includes the following elements:

Today, several varieties of Uzbek knives are known, which have wide and medium-sized blades. Universal working varieties are made with a blade length of 8-9 cm, they are distinguished by the quality of sharpening, and due to their original shape they are characterized by excellent cutting ability. Massive varieties will become great option for shredding vegetables. They are balanced, fit well in the hand, and their use is not particularly difficult.

Collection and working options

It is customary to divide the Uzbek pchak knife depending on its purpose. Beautifully decorated models, which are made of stainless steel, are intended more for decoration and are especially appreciated by collectors. If you choose a knife for work and use on the farm, then preference is given to weapons made of heavy-duty carbon steel. In the latter case, hardening can be performed by zone hardening, exclusively at the cutting edge of the blade.

For standard working models, the strength index is usually 50–54 units, therefore, even despite the use of high-carbon steels and the presence of hardening at the blade, it is often not possible to maintain the sharpness of the cutting edge for a long time. For sharpening pchaks, special stones and scissors are used to edit the shape, which makes it easier to use such weapons. To increase the strength of carbon steel, it can be oxidized, for which it is immersed in a solution of iron sulfate or Naukat clay.

Collection models have a handle richly decorated with engraving, which is covered with transparent enamel paint on top. Also appreciated are the options in which the handles are decorated with birch and mother-of-pearl inserts. The best craftsmen who work on such weapons by hand leave the so-called tamgo on the blade. This is the engraving signature of the master who made the specific model. Experienced collectors who are well versed in such weapons will be able to identify the area where a particular knife was made and the master who worked on such weapons from one signature engraving.

It is necessary to choose a blade taking into account what the pchak knife is intended for, how it will be used. If you need a weapon for working in the kitchen, then it is preferable to use the classic Uzbek pchaks, the blade shape of which is ideal for cutting meat, fruits and vegetables. But collectors choose old Akkadian varieties and handmade Uighur pchaki knives, which have an original appearance, have rich inlays on the blade and handle. They are highly prized by gun lovers.

When purchasing such a knife, it is best to refrain from ordering in various online stores. Otherwise, you can buy low-quality weapons, which not only do not meet all the classic requirements for the Uzbek pchak, but will quickly fail and require sharpening in just a few months of use.

It is best to buy knives in specialized stores where you can be completely sure of the quality of the offer. Collectors purchase them at special auctions and thematic forums. Such blades have all the necessary documents and certificates to confirm their originality and origin.

The cost of the best models

The cost of an Uzbek knife will depend on the specific model, the material from which it is made, as well as the brand of the manufacturer. The simplest clinics can have a price of 500-1000 rubles. Knives from Uzbekistan, made according to all the canons, will already cost 2-3 thousand rubles.

Models made by well-known gunsmiths who have been working on such blades for many days are estimated at 20-30 thousand rubles or more. Collectors also appreciate weapons that are 100 years old or more. Knives are made exclusively by hand, have an attractive appearance, which allows them to become a diamond in the collection of every edged weapons lover.

When purchasing knives, it should be remembered that in some models the blade length exceeds 90 mm. Such blades already belong to the category of edged weapons with all the ensuing restrictions. Their use will present a certain difficulty, so they are in demand only among collectors or among buyers who have the appropriate permits to carry edged weapons.

Uzbek national pchaks is a versatile weapon, which is valued by collectors and used in everyday life when cooking. It is important to choose the right knife, which is made in compliance with all the requirements for classic models, made of durable carbon steel, which greatly simplifies its subsequent use. It is necessary to take into account all the recommendations for choosing, including refraining from buying Uzbek pchaks in stores that do not guarantee the high quality of weapons.