Creative Christmas tree with your own hands from improvised materials. How to make a Christmas tree out of paper, cotton pads, cones or tinsel: master classes for kindergarten and school. How to make a polymer clay Christmas tree

If you would like to holidays there were as many Christmas trees as possible in the house, or you are going to accompany each gift with a homemade Christmas tree, these ideas will definitely appeal to you. We have collected for you the simplest Christmas trees that you can make with your own hands from improvised materials. You will spend a minimum of free time on the manufacture of each of them, and the result will be impressive.

Christmas tree from a magazine or postcard

Most likely all necessary materials for making this simple Christmas tree is on your desktop right now.

What will we need?

• magazine, postcards or colored cardboard
• a simple pencil or pen
• thin ribbon for gift wrapping
• any stand
• Super glue

Tip: as a stand, you can take a bucket from a children's designer, a candlestick, a glass, etc. We need to make an imitation of a bucket in which the New Year's beauty is traditionally placed

We cut the magazine into squares of different sizes, and then we fold each of them with a cone and insert them into each other like a pyramid. You can make a fringe. The tip of each cone must be smeared with glue.

You can make one large cone, and then just paste over it with pieces of magazine clippings or a cut postcard.

As a rod, we take a simple pencil (they are often beautiful - then they don’t even need to be decorated) or a pen. We cover them with glue and tightly wrap them with tape.

We insert the pencil with one end into the cone, with the other into the bucket, so that the structure is stable. The bucket can be filled with plasticine or cotton soaked in glue.

This simple Christmas tree will brighten up your office desk and make a great addition to any gift.

Christmas tree made of coins

If you want to wish someone wealth in the new year or attract it to yourself, make a Christmas tree out of coins. It is believed that this accessory attracts financial well-being.

What will we need?

• thick cardboard (not glossy)
• coins of the same size
• Super glue

We turn the cardboard into a cone and glue the side seam.

We stack the coins in even rows, gluing them to the “moment”. To create the effect of twigs, you need to start from the base and move to the crown.

Don't make the cone too big. You always need more coins than it seems at first glance.

Christmas tree made of thread or twine

For those who like minimalist design, this tree will the best option.

What will we need?

• thick cardboard (not glossy)
• skein of twine or yarn
• PVA glue

There are two ways to make this simple Christmas tree.

First, prepare a cardboard cone and securely glue the side seam. Then we do the winding.

First option

We coat the cone with glue and tightly wind the thread around it, moving from the crown to the base. In this case, it is better not to coat the entire tree at once, but to do it gradually so that the glue does not have time to dry and you do not get your hands dirty.

Second option

Pour the glue into a bowl and dip the threads there for a few seconds. Then we do the winding. In this case, the finished craft can be immediately sprinkled with dry sparkles so that it flickers.

Such Christmas trees can be additionally decorated with light plastic balls or wrapped with a garland.

Christmas tree from tea bags

A great way to present an ordinary gift original way.

What will we need?

• toilet paper roll or cardboard
• a pack of tea
• double sided tape

We glue a narrow strip along the entire diameter onto the cylinder. Then we simply “seat” the bags so that we get a semblance of twigs.

If you can’t form a Christmas tree, paste over a cylinder rolled up from a piece of cardboard.

You can replace the tape with glue, but it's better not to do this. If you use tape, the gift recipient can easily remove the tea bag when they want to try it.

You can complete the composition with a cardboard star or some interesting candy.

Christmas trees made of fabric

This idea seems difficult, but it is not quite so. Of course, it will take time to prepare the fabric. But if you have fabric swatch kits, which are often found in art departments (or quilting kits), the process will be very fast.

What will we need?

• square pieces of fabric in different sizes
• pencil, knitting needle, stick for sushi or balloon

The process of assembling a Christmas tree is similar to a children's game of pyramids. It is tedious to simply string pieces of fabric of different sizes so that they overlap each other with scales.

True, if you don’t have ready-made sets, you will have to sheathe each square for a really long time. But such a homemade new year gift it will be a pleasure to receive your loved ones.

The finished craft can be completed with an asterisk or a pom-pom.

Christmas tree made from natural materials

This tree will last you a very long time. In addition, this accessory smells very tasty.

What will we need?

• smooth and thin rods
• five thick branches of the same length
• thin wire

Tip: if you do not have rods, but you like the idea of ​​\u200b\u200bdecorating a Christmas tree, replace the rods with twine or thick wire

Connect five branches of the same length together to form a cone. At the top, tightly pull them into a pile with a wire. And then connect the branches at a distance from each other. The wire will not let them scatter and make the structure stable.

Wind the workpiece with rods or other material, simultaneously winding them with wire in a perpendicular direction so that they do not scatter.

The finished Christmas tree can be decorated with artificial snow.

All these Christmas trees made from improvised materials will perfectly fit into any interior. Give them to friends or put them at home. This is unusual and very beautiful!

Views: 1 736

Do you love needlework? I love it very much, and my last idea is a DIY Christmas tree. Why not make a nice Christmas tree for the main family holiday years, especially since this does not require anything supernatural - a little ornamental materials, a good master class and free time.

The most versatile tree is obtained from cones - such a tree can decorate any interior, become a cute New Year's souvenir, or even an element of New Year's table decor.

How to make a Christmas tree from cones graceful and beautiful? We will need:

• thick cardboard;
• glue;
• cones of the same type;
• pencil;
• sharp scissors;
• golden paint and glitter;
• any decor of your choice.

First, we make a cone out of paper or cardboard with our own hands - you need to take a circle, cut it in half or into three parts, and glue each segment into a cone.

Then you need to separate the scales from the cones, they will take a lot - you can take wire cutters or scissors, you can use a sharp knife.

After there are enough scales, you can proceed to the next step - gluing. It is necessary to glue the cardboard blank with scales as in the photo, and you will get a beautiful one.

If desired, you can leave it in in kind, but I was interested in a golden Christmas tree - so we paint over the scales with gold paint, and moisten the tips of each scale with glue and sprinkle with sparkles. If desired, you can decorate the Christmas tree to your taste.

Thus it is possible to do Christmas tree small size with your own hands from improvised materials - you just need to be patient, because gluing the scales is more than painstaking work.

There is another method, when a cardboard cone is glued not with scales, but immediately with bumps.

For work you will need:

• pine cones;
• cardboard or thick paper;
• Christmas tree pot;
• scissors;
• tinsel, rain and beads for the Christmas tree;
• glue gun and stock of rods;
• brown paint and brush;
• a small piece of cloth;
• small ;
• gypsum, cement or other building mixture.

We make a Christmas tree from cones and cardboard with our own hands in steps:

1. glue a cardboard cone (if desired, you can use a template); paint the cone brown paint and dry;
   
   
2. while the paint dries, we fill the future pot with a diluted building mixture;
3. when the plaster dries, you need to paste over the pot with a piece of cloth;
   
   
4. glue the cone to the pot and begin to paste over the cone with cones - best from the bottom;
5. we fasten the cones as closely as possible - we apply a drop of glue on the cone, and press it to the cone (we fix one of the cones vertically on the top of the cone to make a beautiful top);
   
   
6. after the glue dries, you can start decorating the Christmas tree with tinsel, beads and miniature toys.
   
   

Paper and cardboard

The easiest way to do it is New Year paper Christmas tree - everyone loves paper crafts, and making them is quite simple. So, in order - first from crepe paper.

Christmas tree from corrugated paper DIY can be very fluffy and stylized. A fluffy paper Christmas tree is painstakingly made, so it’s better to stock up on time. From the materials we need:

• cardboard or thick paper;
• green corrugated paper;
• glue;
• scissors;
• for decor - a bow, red paper, a little glitter and beads.

The next do-it-yourself Christmas tree made of bright paper is a little easier and faster - in any case, here you will not need to cut needles from colored paper.

Such a Christmas tree made of colored paper is voluminous and may well decorate the New Year's table (and hide, for example, a bottle of champagne).

For manufacturing we need:

• cardboard;
• glue gun;
• green corrugated paper;
• various decor;
• scissors.

This do-it-yourself paper tree is done like this:

1. first we glue a high (from forty centimeters) cone from a quarter of a circle and dry it;
   
   
2. cut a strip about 18 centimeters wide from a roll of corrugated paper. The length should be enough to wrap the Christmas tree several times - about one and a half meters.
   
   
3. We fold a strip of paper in half (along) and glue it at a distance of a centimeter from the edge. And we give the paper the shape of a frill - you need to stretch it slightly along the fold line so that it goes like a wave.
   
   
4. We coat the edge with glue along the entire length of the paper blank and begin to paste over the cone in a spiral, starting from the base.
   
   

You can decorate the Christmas tree with corrugated paper flowers or beads.

Do you know how to make a Christmas tree out of paper with your own hands in just 4 steps?

1. Glue a cone out of thick cardboard.
2. Cover it with wrapping paper.
3. Glue a sparkling star to the crown.
4. Decorate with a bow or beads.

The origami tree looks very interesting. You probably know about modular origami, when a Christmas tree is made of triangles, but I met such a voluminous origami Christmas tree for the first time, and I am happy to share the lesson with you.

What is an origami Christmas tree made of?

• thin cardboard or thick paper for scrapbooking;
• wooden sticks;
• candlesticks and caps;
• glue.

1. First you need to cut out the modules for the future Christmas tree - they will be circles of different diameters. I just drew circles with a compass about 16, 13, 10 and 7 cm.
   
   
2. Each circle must be folded in half until 16 folds are obtained (i.e. folded in half 8 times).
   
   
3. It is necessary to fold the circle into a kind of fan and cut the tip at an angle.
   
   
4. Folded and trimmed circles from large to small must be strung on a skewer and glued.
   
   
5. Set Christmas trees in candlesticks and pour glue. Candlesticks and caps can be painted in any color, if desired, the Christmas tree can be decorated.
   
   
6. Such Christmas trees look good on tables and window sills.
   
   

By the way, a paper Christmas tree can be unusual - for example, made of cardboard.

See how to make an eco-style artificial Christmas tree out of cardboard:

1. First, we will need to print the modules - you can use the Christmas tree shape you have drawn to cut out, or use our paper cut template. There must be at least eight modules made by you (click on the image to enlarge and download).
   
   
2. We fold each blank in half and glue the Christmas tree in the manner of a modular origami (from segments). Cut if necessary.
   
   
3. We go through all the edges with a small hole punch - you don’t need a diagram, but it’s better to mark the distance with a ruler. And we spray the Christmas tree with white paint from a spray can, but not tightly - so that it looks powdered with snow.
   
   
4. We sew the edge with white threads, yarn or a narrow ribbon.
   
   
5. Cut out a star from cardboard, sprinkle with white paint, coat with glue and sprinkle with sparkles.
   
   
6. We install a star on the Christmas tree, and sprinkle the whole craft with white sparkles.
   
   

Felt and fleece

How to make a Christmas tree warm and soft? In this case, in my collection of lessons there is a felt tree.

Making a Christmas tree from felt with your own hands is quite simple, we don’t even need a pattern, you can draw a template yourself (well, or print a ready-made template).

So what do we need:

• thin felt or fleece (it is better to strengthen it with glue so that it keeps its shape better);
• synthetic stuffing material;
• lace, beads and decor for decoration;
• blanks for a pot and a tree trunk;
• building mixture;
• polymer glue;
• some twine.

We make a Christmas tree from felt or fleece with our own hands - even a child will understand my instructions.

1. We start with a pattern - you need to draw a template for our future Christmas tree (or use any ready-made template, for example ours, click on the picture, it will enlarge and you can download);
   
   
2. then we transfer the pattern to the fabric and cut out two mirror blanks, leaving an allowance for the seams;
   
   
3. if you plan to use lace, then it is better to stitch it at this stage;
   
   
4. sew the blanks, leaving small plot to twist and stuff;
5. we cut the allowances with special scissors - we get a zigzag; we turn the workpiece out and stuff it well;
   
   
6. decorate the product to your taste;
   
   
7. the blank for the trunk of the tree must be wrapped with twine and sewn into the soft part;
8. we also wrap the blank for the pot with twine (I glue the twine so that it lies more evenly); on top of the twine, you can decorate the pot with lace, sequins or snowflakes;
   
   
9. pour the building mixture inside the pot and set the Christmas tree, wait until it grabs;
   
   
10. decorative Christmas tree is ready.
    
    

See how you can also decorate our Christmas trees, for example with buttons:

In the first case, we got a children's Christmas tree craft, as if from cartoons, or you can make felt Christmas trees more strict and restrained. For example, with the likeness of spruce paws.

This tree is best done when you have scraps of different shades of green felt - a wide variety of tones looks elegant and original. For manufacturing you need:

• several scraps of felt in different shades of green;
• foam cone;
• silicone glue (you can use a glue gun).

1. If there is no foam cone, then you can simply roll the cardboard cone, and for stability, fill it with crumpled paper or foil. A foam cone needs to glue a circle of felt on the bottom, this will be the base of the Christmas tree.
   
   
2. We cut out “leaves” from felt that will imitate spruce paws - you can not make a template, but cut it immediately by eye, the unevenness here will be a highlight.
   
   
3. You need to start gluing the cone from the bottom, overlap the leaves so that the cone is not visible.
   
   
4. The next row must be glued with a slight shift so that the leaves lie in a checkerboard pattern.
   
   
5. So it is necessary to paste over the entire tree. The crown can be decorated with a star, and the Christmas tree itself can be dressed up with tinsel or rhinestones.
   
   

Various ideas and master classes

What else can you make a Christmas tree from? Creative needlewomen offer to make a Christmas tree with their own hands from paper napkins - such Christmas trees look like topiaries, but at the same time they are interesting and original.

For the manufacture will need the following materials:

• ordinary napkins - you can take colored, plain or with an ornament, the tree will still be beautiful;
• some kind of decor - well, for example, a string of beads or an ordinary rain;
• thick paper or some cardboard;
• stapler and staples to it;
• base for a pot;
• a blank for a tree trunk (you can take a barbecue skewer or an ordinary branch, in extreme cases a simple pencil will do);
• building mixture;
• circle template 3-4 cm;
• ribbon;
• scissors.

The easiest step-by-step lesson on making Christmas trees from napkins:

1. we circle the template on several napkins and fasten the napkin with a stapler in the center of each circle;
   
   
2. cut out circles (better cut out more); we lift each layer perpendicular to the previous one and slightly crush it, we get impromptu roses or carnations;
   
   
3. we do this with all the blanks; if you make the basis for a Christmas tree the size of an A4 sheet, then you will need about 60 elements;
   
   
4. pour the building mixture into the blank for the pot, set the tree trunk vertically; from thick paper we make a cone with a bottom and put it on a tree trunk;
   
   
5. we begin to paste over the cone with “flowers” ​​from top to bottom (by the way, if the cone is very different in color from napkins, then it is better to pre-paint it to match); paper flowers need to be glued as closely as possible to each other so that the Christmas tree turns out to be fluffy;
   
   
6. the trunk of a decorative tree is wrapped with a ribbon, and the pot is decorated with the remaining paper elements;
7. you can decorate crafts with beads or tinsel.
   
   

Do you want a unique Christmas tree? To make a Christmas tree out of laces with your own hands, you will have to work a lot with your hands! Crafting a Christmas tree made of multi-colored laces requires well-developed motor skills.

Video lessons

Do you want to learn how to make cheerful Christmas tree with your own hands? Here is a funny Christmas tree with foamiran legs:

Or a mini Christmas tree made of felt:

And this one is made of twine and coffee beans:

Christmas tree origami:

Super video bonus "10 ideas for creating Christmas trees from different materials at hand":

Here are some Christmas trees you can make with your own hands from different materials. To make such beauty, even templates are not needed.

Christmas decor on the wall in the form of a Christmas tree:

Now you know that making a Christmas tree with your own hands is easy and simple, the main thing is to show a little imagination!

Brightly decorated Christmas tree main character New Year. That is why on the eve of the holiday we will make a Christmas tree in various versions.

DIY Christmas tree crafts can be made in or at home.

Craft Christmas tree from plasticine

We mold the first Christmas tree from plasticine - the most popular material for creativity in kindergarten. Make three green balls and one brown from plasticine.

We turn two green balls into cakes with wavy edges. From the third ball we sculpt a cone with wavy edges. From green plasticine of a different shade, we roll two small balls.

We flatten the green ball and place it on a wavy cake. By the same principle, we connect the green ball and the cone.

From a brown ball we roll a small cylinder. We attach it to the second cake. This is the future trunk of the Christmas tree.

We combine all the plasticine blanks. We should get a Christmas tree with fluffy branches.

Look at the video - how to make a plasticine Christmas tree:

Salt dough Christmas tree

A Christmas tree in kindergarten can be made from salt dough. This craft will be possible even for the smallest children.

Cooking salty dough with the addition of green paint and sparkles. We roll it into a cake with a thickness of no more than 0.5 centimeters. We put a thick film so that the dough does not stick to the rolling pin.

We cut out a Christmas tree from the dough using a special baking dish. You can cut a Christmas tree with a regular plasticine stack.

We decorate the Christmas tree by pressing decorative beads and rhinestones into it.

Let the piece dry. Christmas tree made of dough - ready!

You can decorate a Christmas tree made of salt dough with sparkles and colored powders.

Christmas tree made of thread and cardboard

A spectacular New Year's souvenir can be made from cardboard, threads and beads. We cut out a Christmas tree from thick cardboard and paint it in green color.

We rewind the Christmas tree with threads with beads.

Decorate the Christmas tree with a star. It remains to fasten the loop in the upper part and our New Year's souvenir is ready!

You can use rhinestones or sequins to decorate such a Christmas tree - the craft will turn out to be very bright and festive.

Herringbone from corrugated paper

You can make a very spectacular Christmas tree out of corrugated paper. We need a base - a cone made of cardboard. We cut green corrugated paper into strips 2-3 cm wide. We take the first strip and, collecting it with an accordion, glue it to the cone.

We continue to fix the strips of corrugated paper on the cone. We should get fluffy spruce branches.

We twist the top of the Christmas tree out of paper and fix it on the top of the cone. We decorate the Christmas tree with beads.

We decorate the top of the Christmas tree with a small star. Easy to perform and elegant New Year's crafts "herringbone" - ready!

Herringbone applique from a disposable plate

A beautiful Christmas tree craft is obtained from a disposable plate. We color it green in advance, cut it into three parts, and glue it to the winter landscape drawn on a piece of paper.

Creating a landscape can be a preparatory step: first we fill in the background of the sheet blue color,

and then, when the paint dries, we glue snowdrifts of white paper to the bottom.

You can draw or glue ready-made decorative falling snowflakes and a paper star on the main background.

It remains only to decorate the Christmas tree with a star and beads of multi-colored balls. Beads can be made in advance by stringing beads on chenille wire.

Herringbone lace appliqué

A herringbone using the applique technique can be made from lace. Cut the lace into small pieces. We glue the lace on the base, picking it up with folds.

Glue the pieces of lace onto the base one by one. To the top of the Christmas tree, the pieces become smaller and smaller.

We decorate the Christmas tree with beads, buttons and a ribbon bow.

We place the Christmas tree on a sheet of paper folded in half and we will get an amazing New Year's card!

Herringbone applique

Herringbone appliqué made of felt

The kids will also like felt appliqués. To make an interesting New Year's craft, we bring pieces of green and green felt to the kindergarten. Brown, as well as small multi-colored pompoms.

We cut out a triangular crown from green fabric, and a rectangular tree trunk from brown fabric.

Decorate with pompoms like Christmas balls.

Glue the stem of felt.

Christmas decoration "Christmas tree made of felt"

You can make a charming Christmas tree out of green felt. We cut green circles of different diameters from felt. We make a hole in the central part of the circles.

We glue colored rhinestones on the circles.

We make a loop from chenille wire.

We string a bead in the form of an asterisk on the chenille wire.

We begin to string circles of felt on the chenille wire, starting with the smallest.

The last circle will be the largest. We tie a knot on the chenille wire so that the circles hold tightly.

A lovely Christmas tree made of felt - ready!

The Christmas tree made of felt is incredibly cute and homely. According to the paper template, we cut out two identical blanks from thick felt. We sew them on a typewriter, leaving a small hole. Don't forget to sew on the ribbon at the top of the Christmas tree. We fill the Christmas tree with cotton wool through the hole. Sewing up the hole. We can decorate such a Christmas tree with beads, sequins, beads, rhinestones, pompons - any available material.

Volumetric Christmas tree made of cardboard

But even with great interest, children will do voluminous crafts. They can also be quite simple. For example, by folding a piece of unusual green paper into a cone, we get a real fir tree.

If the bottom is glued to the cone, then it can be used as a package for a small sweet surprise, which we put inside in advance.

It remains only to hoist a traditional star on its top.

You can do without a star, replacing it with a pompom.

DIY tinsel Christmas tree

Another version of the New Year's beauty is made using tinsel. For crafts, we need a long green tinsel. From cardboard we fold the base-cone.

We wrap the cone with tinsel, fixing it with glue.

We wrap the entire cone to the base. Christmas tree made of tinsel - ready!

To decorate the Christmas tree, you can use sweets, beads or small Christmas decorations.

Watch how to make a Christmas tree out of tinsel in the video:

An incredibly beautiful and original pasta Christmas tree is obtained. To make it, we need to make a cone out of paper. Then we put the cone on the stand and start gluing pasta from the bottom row.

We try to use pasta in the upper part smaller size. We fill the entire cone.

We color the Christmas tree. If we use gouache for coloring, then we try to take as little water as possible.

We coat the edges of the Christmas tree branches with silver gel. We glue on the Christmas tree decorations - bows and bells. Christmas tree made of pasta - ready!

Watch how to make a Christmas tree from pasta in the video: We give a bend with an iron Herringbone from foamiran with a red star

We give the Christmas tree holiday look- glue multi-colored beads and bells. Craft Christmas tree from foamiran to kindergarten - ready!

Craft Christmas tree from organza

A very beautiful Christmas tree is obtained from green organza. We will need to cut the organza into strips of different widths. Fold the strips in half and pull them together from one side in the center. We should get at least five round blanks.

We string the organza on the base

We decorate the upper part of the base with a green ribbon and a bow. We fix the lower part of the Christmas tree with plasticine in a glass or other decorative container. It remains to decorate our Christmas tree! We glue delicate sequins on its branches. Craft Christmas tree from organza - ready!

Topiary - do-it-yourself Christmas tree

Topiary is a tree of happiness. We came interesting idea make a topiary in the form of a Christmas tree. This will be a wonderful New Year's wish of happiness. We make a cone from foam.

Wrap the cones in foil.

We twist one of the ends of the copper wire into a spiral. Attach double sided tape to the cone. We begin to wrap the cone with green yarn of different shades. The adhesive tape will fix the threads on the cone well.

Decorate the bottom of the Christmas tree

When the entire cone is wrapped with threads, we tie their ends and decorate them with beads. Glue beads onto the Christmas tree. We fix the Christmas tree in a decorative bucket using plaster or plasticine. Use wool to frame the bottom of the Christmas tree and the space inside the bucket. Christmas tree topiary - ready!

Glue a cone out of cardboard.

We decorate the Christmas tree with tinsel and beads. Great Christmas craft - ready!

Christmas tree from napkins (video)

Look at the video for another version of the Christmas tree made of napkins.

I would like to celebrate the New Year good mood. A creative Christmas tree will help to spend the holiday in an interesting and original way. It is easy to make from what is at hand. You can turn napkins, sweets, planks and even pasta into a fluffy beauty.

creative christmas tree

It's not hard at all to create. And it will be so unusual that not everyone will guess what it is made of. The material is very affordable - three-layer paper napkins. First you need to turn them into "roses", and then stick these blanks on the base.

So, first make a cone out of whatman paper or cardboard. To do this, cut out the triangle and round its hypotenuse. Glue two legs one on top of the other.

Take the first napkin. It can be green or whatever. Do not unfold the napkin, put a round object with a diameter of 6-7 cm on it, circle it and cut it to size.

Forming roses and attaching them to a cone

Since the napkin is three-layer, folded 4 times, you cut out 12 circles at once, which lie in a pile. Staple them in the middle with a stapler. Now the fun begins. Pick up the first circle and fold it into a wick. This is the core of the flower.

Lift the second circle, fold it, marking 4 edges. It should be close to the core, but not very tight. Twist the third circle in the same way, then all the rest. The last, twelfth, just slightly bend it without lifting it so that it becomes wavy. The flower is ready, glue it to the bottom of the cone.

Make a second rose, attach it in the same way. After the first bottom row, move on to the second, placing the roses in a checkerboard pattern. But make flowers for him a little smaller in diameter. This also applies to the next rows. The closer they are to the top of the cone, the smaller the diameter of the blanks. Attach the last rose to the top.

You can leave the Christmas tree like this or decorate it with beads, beads, sparkles.

Colored paper goes

The following idea is suitable for those who want to quickly make a small copy of a coniferous tree. It can be hung as a talisman and decoration on the glass of a car, put on the desktop in the office.

To make a yellow Christmas tree, cut and glue three cone blanks that differ in size. Put the largest one on the table, put a smaller figure on it, and the smallest one on top. To fasten all these parts together, drop glue on the top of the two lower cones, then press for 20 seconds, placing the blanks in the indicated order - from large to small. If you want to hang a Christmas tree, pierce the top of the head with a paper clip and tie it to it. You can leave a small hole at the top of each cone through which you will thread the cord. To keep it tight, tie its two ends into a knot on the back.

Three-tiered openwork Christmas trees made of paper

By almost the same principle, you can create two more small spruces. For the first, cut out 3 circles, the diameter of each is smaller than the diameter of the next. With scissors, make a fringe on the edges of these figures, you can slightly bend it up to give fluffiness to your creation.

On the side of each of the three blanks, make an incision to the center of the circle, put the incised sides on top of each other with a slight smell and glue, but not completely, leaving small holes in the center. You will also pass the cord through them and fix the original craft with it in a hanging position. Here is such a creative Christmas tree turned out. With your own hands, you can make the second one almost the same, stick confetti, sparkles on it and arrange a trio of forest beauties, as shown in the photo.

Once a plank, two planks, there will be a Christmas tree

A creative Christmas tree made from improvised materials turns out to be very original when fantasy is connected. If the household has slats 4-5 cm wide, they are perfect. Since the spruce is triangular in shape, cut the thin planks in such a way that there is a smooth transition from the smallest to the largest. For example, the difference in length between the rails is 10 cm.

Nail the largest rail vertically to the wall, and attach the rest horizontally to this one with screws or nails. They should be symmetrical. Knock them down at the junction of the middle of the main plank with the center of each. Fasten them through the same number of centimeters.

In addition to one main one, which plays the role of a trunk, 7 planks are enough, which will be branches. Here is such a creative Christmas tree turned out. With your own hands, it is easy to wrap wooden branches with tinsel, including the crown. On such wooden boards you can hang socks for gifts. If the gifts are large, they are placed under the spruce.

Don't throw away empty bottles

Under such a tall tree, many gifts will fit. The main thing is not to be naughty around him, so as not to break him. To create this grandiose splendor, you will need many green bottles, circles of glass or hard transparent plastic, plexiglass or plywood.

Start laying out the tree from its bottom. First place the round base on the floor, then place the bottles upside down on it. To make the design durable, it is better to put a little on the bottom of the bottles and fix the container on the base. Place them next to each other.

Put a circle on top of a slightly smaller diameter than the previous one, place and fasten the bottles of the next tier on it. Lay out the entire tree in the same way. Each subsequent row will have fewer bottles than the bottom row. When there is one left at the top, attach a star glued from corks to it. You can admire the glass tree!

Creative pasta tree

There are many ideas for New Year's fantasies. Pasta literally in half an hour will turn into a beautiful Christmas tree. In addition to these, you will need plastic bottle cone-shaped, glue gun, green and gold acrylic paints.

Cut off the bottom of the bottle so that the workpiece is stable on the table. Cover the bottom of the bottle with glue, attach the first row of pasta. To do this, use products in the form of bows, then a creative Christmas tree, decorated with your own hands, will look amazing.

Above the first tier, place the second, also gluing pasta. Attach them in a checkerboard pattern with respect to the blanks of the first row. At the same time, place the bows vertically. After that, design the third and subsequent tiers. Then you will have a charming creative Christmas tree. A master class with photos will help you understand how to do this.

After the entire bottle is covered with pasta, put it on the bottom. If you have a stable round support, you can attach it so that the leg of the New Year's beauty can be seen. If not, the tree will look great anyway.

Decorating a pasta miracle

Paint the bows with acrylic paints or with a spray can. Such paints also dry quickly and are applied evenly. The only thing you need to take care of is not to stain the surrounding objects. Therefore, on the street or on the balcony, covering third-party objects with a board or piece of cardboard.

To decorate the New Year's attribute with toys, take openwork pasta. They can be in the form of stars, circles, letters. A creative Christmas tree made with your own hands will help awaken your imagination, and you will figure out which dough products will turn into decorations. If you don't have the ones in the photo, string small pasta onto a strong beaded thread or string, dye it, and then wrap it around the Christmas tree.

This is how a creative Christmas tree is made and decorated with your own hands. The photo shows what color you can paint and how to attach accessories to the New Year's beauty. To do this, you can also use spray paint in a spray can of gold color. When it is completely dry, apply a drop of glue from the gun to each part and attach it to the base.

In order to make a star, glue together 5 identical parts, attaching the sixth to the center. Glue them to a long pasta base, fix on the neck of the bottle with a glue gun. See how such a creative Christmas tree is made with your own hands, the photo shows the nuances of the creative process.

candy tree

The cone will serve as the basis for the next model. In addition to it, you will need sweets in shiny wrappers. Well, if they are green. Lay the first candy vertically, attach it to the bottom of the cone with tape. Attach another one nearby, draw a strip of adhesive tape to also stick to the base.

After completing the first, proceed to the second and subsequent rows. Thus, attach all the sweets to the top of the cone. You can alternate the candy tier with tinsel.

If this Christmas tree is handed over to an adult, fix the sweets in the wrapper in the same way not on a cone, but on a bottle of champagne.

As you can see, there are many ideas for creating creative trees. You can make a Christmas tree from a variety of improvised means, which will give a festive mood and allow you to find yourself in a fairy tale!