Electronic scales Portable electronic scale. Scales Portable Electronic Scale Instructions for electronic scales in Russian

Portable Electronic Scale - description:

Using these small portable scales, you can weigh loads from twenty grams to forty kilograms inclusive. Weight determination accuracy is maximum - Portable electronic scale determines the weight of the load with an accuracy of ten grams! These scales will be useful in any household.

Scale calibration:
Turn on the electronic pocket scale with the button
Wait until 0.00 appears on the display of the electronic scale, then press and hold the button until the display shows 0, then release the button. After this, the weight required to calibrate the electronic pocket scale will flash on the monitor. Set the required weight on the scale hook, after the number stops flashing the scales are calibrated.
Calibration of electronic pocket scales should be carried out at room temperature, after at least 30 minutes of keeping the scales at a constant temperature.

Portable Electronic Scale - technical specifications:

Automatic shutdown of scales after 1 minute of inactivity
Operating temperature range: 0-30°C
The LCD monitor is equipped with a blue backlight
Keep digital pocket scales separate from your cell phone, at a distance of at least 50 cm from it
If the monitor of electronic scales blinks, replace the batteries.
Do not overload electronic scales to avoid damage to the mechanism. If there is an overload, the following message will appear on the scale monitor:

Portable Electronic Scale - delivery set:

Portable Electronic Scale – 1 pc.
Batteries – 2 pcs.
Instructions for use

Please note that for all our regular customers, we are extending the warranty period for all medical equipment from 12 months to 18 months, and for some devices - 24 months. We also provide assistance to our regular customers in post-warranty maintenance and repair of equipment purchased from us!

Portable electronic scale Electronic scales.

Maximum weight determination accuracy -Portable electronic scaledetermine the mass of the load with an accuracy of ten grams!
To weigh any item, you must first turn on the scales with the button"On". Next, after zeros are displayed on the screen, you should select the unit of weight measurement that you need, and only then you can hang the item being measured on the hookcantera Portable electronic scale.
At first, the numbers on the screen will “jump,” so if you want to know the exact weight of an item, try not to allow unnecessary vibrations and shakes until the numbers calm down and the final stable weight reading appears on the monitor.
Can be used even in the dark, as the device is equipped with backlight. As for the temperature regime, the canter performs its functions perfectly at temperatures from zero to plus thirty degrees.
Portable electronic scale extremely easy to use as they have only three buttons -"On", "Off" And "Mode". Using the first two they turn on/off, and the third, the buttonModedefines the unit of weight. That is, you can weigh not only in kilograms, but also, for example, inpounds. If option "Mode"not activated, weighing takes place ingrams/kilograms .
Portable electronic scalehave a special function for determining tare weight. Having pre-weighed the packaging, press the button"TARA", and only then start weighing the item you need.
It is not recommended to weigh heavier objects40kg. However, in case of overload, the device itself will “inform” you about it with a corresponding inscription on the screen. If the scale's batteries are running low, you will also know about this thanks to a flashing message.
Electronic scales Portable electronic scale work on 2 AAA batteries . If you do not use the scale for more than one minute, it automatically switches to"Off", thanks to which energy is not wasted and the batteries do not run out prematurely.

Portable Electronic Scale INSTRUCTIONS Maximum Weight: 40Kg, Minimum Weight: 10g Turning on  Place the scale in a vertical position without loading  press the ON /OFF key, the screen will show (8888) and a sound will be heard  wait about 2 seconds until the screen displays ( 0.00 or 0.000),  The scale is ready for weighing. Tare/zero setting  When weighing bulk cargo, hang the container on the hook  press TARE and the screen will show 0.00 or 0.000, the scale is ready to weigh  put the cargo in the container, the screen will display the weight of the cargo. Selecting the lock function  Press TARE for 2 seconds. L_ON or L_OF will appear on the screen.  Press POWER to weigh new loads  L_ON activates the locking function, that is, the weight of the unit load will be recorded on the screen  L_OF removes the lock function, that is, the weight of the unit load will NOT be recorded on the screen. Weighing  When the screen shows (0.00 or 0.000), hang the weight on the hook, the weight of the load will be displayed on the screen.  The permissible maximum weight should not exceed the full load + 9d (5kg: D = 5g, 10kg: D = 10g, 20kg: D = 10g, 40kg: D = 20g),  If overloaded, O- will appear on the screen Ld and warning sound.  The scale calculates the weight automatically. When the weight is determined, a sound is made  The sound and the appearance of HOLD or a lock on the screen in L_on mode indicates the end of weighing. Selecting units of measurement Press UNIT to select the unit of measurement between kg, lb , jin ,oz (1kg=2.2lbs=2jin=35oz) Temperature test Press UNIT for 2 seconds. The temperature will appear on the screen. Measurement error ±2С. Shutdown  Press ON /OFF key to turn off (without HOLD mode)  Press ON /OFF key to clear HOLD icon, and press ON /OFF key again to turn off in HOLD mode  Press ON /OFF key to exit temperature mode, press the ON / OFF key to exit to temperature conditions The scale will automatically turn off after 120 seconds of no operation. Warning: 1. Vertical position is required for power-on or self-diagnosis. 2. To maintain weight accuracy and protect the scale, keep the stationary rings straight or use additional weighing attachments. Do not hold the plastic housing when weighing. 3. Avoid sudden movements and vibrations during weighing. 4. Use clean water and detergent for cleaning. Do not use aggressive liquids (gasoline, solvents, caustic soap, etc.) to clean the ABS plastic body of the scale. 5. When the (battery) sign appears on the screen, it means the batteries are low and need to be replaced. If the scale is not used for a long time, remove the batteries to prevent leakage and damage to the circuits. 6. Do not disassemble the scale if it needs repair. Contact the seller.

Portable electronic scales Canter Portable electronic scale can weigh items from 20 grams to 40 kilograms inclusive with an accuracy of 10 grams.

DigitalcanterPortable electronic scale

A good housewife always has everything sorted out: both backfill and preparations for the winter. But in order to cook all this deliciously, you need to take the correct proportions of the products. Therefore, there should be scales in the house or, as they are also called, canter. A electronic canter, characterized by increased accuracy, will help you check the weight of products purchased in a store or at the market.

Portableelectronicscale can weigh objects from 20 grams to 40 kilograms inclusive with an accuracy of 10 grams. So as not to spoil digital canter Portableelectronicscale Do not weigh a load heavier than 40 kg. And if this happens, a corresponding message will appear on the device and you should immediately remove the item being weighed.

Manual electronic scales Portableelectronicscale accessible to any user. There are only 3 buttons to control them: Onn, Off and Mode. The first two buttons are used to turn the canter on and off respectively, and the third button allows you to select the weight unit. For example, weight can be measured not only in grams and kilograms, but also in pounds.

Canter portable electronic scalesPortableelectronicscale allow weighing even in the dark, since they are backlit and operate normally at temperatures from 0 to 30 degrees.

Hand-held electronic scales Portableelectronicscale operate on two AAA batteries. To save energy, the scale automatically turns off after one minute of inactivity.

Portableelectronicscale equipped with one more useful function: determination of tare weight. You should first weigh the container, then press the “TARA” button and weigh the selected product.

Specifications portable electronic scales canterPortableelectronicscale:

• Maximum weight: 40 kg
• Weighing accuracy: 10 g
• Operate at temperature: 0-30 degrees
• LCD monitor with backlight
• Power: 2 AAA batteries

Warnings:

1. Do not store electronic scales near mobile phone.
2. If the message appears on the monitor, the batteries need to be replaced.
3. If the message appears on the monitor, it means the scale is overloaded.

Portableelectronicscale 40kg come with detailed instructions manual.

Using these small portable scales, you can weigh loads from twenty grams to forty kilograms inclusive. Maximum weight determination accuracy - Portable electronic scale determine the mass of the load with an accuracy of ten grams! These scales will be useful in any household.

Options

• Automatic shutdown of scales after 1 minute of inactivity
• Operating temperature range: 0-30°C
• The LCD monitor is equipped with a blue backlight
• Keep your digital pocket scale separate from your cell phone, at least 50 cm away from it.
• If the monitor of electronic scales blinks, replace the batteries.
• Do not overload electronic scales to avoid damage to the mechanism. If there is an overload, the following message will appear on the scale monitor:

Weighing operation

Avoid shocks that may interfere accurate measurement weight. Click on and wait until 0.00 appears on the scale monitor. Select the weight unit using the button, grams by default. Place the item you are weighing on the hook of the electronic scale. Read the weight readings only when the numbers on the monitor stop - in this case, the weight readings can be considered absolutely accurate! If you use containers, place it on the hook of a pocket electronic scale, after the numbers stop, press the button, after which the weight will be reset to zero and you can weigh the required item. When finished weighing, press the button.