List of used literature. Interstate Council for Standardization, Metrology and Certification IPC publishing house of standards what is it

Antonov G. A. Fundamentals of standardization and product quality management: Textbook for university students: In 3 hours / St. Petersburg University of Economics and Finance. --SPb., 1995.

Basovsky L. E., Protasyev V. B. Quality management: Textbook. - M.: INFRA - M, 2001. -212 p.

Vasiliev A. L. Standardization for everyone. - M.: Standards Publishing House, 1992.-112 p.

Total quality management: Textbook for universities/Ed. O. P. Gludkina. - M.: Radoi i svyaz, 1999. - 599 p.

Galeev V.I., Vargina M.K. Quality management: problems, prospects. // Certification. - 1994.- No. 4.- p.38.

Galeev V.I., Dvoruk T.Yu. To help enterprises preparing products for certification. //Certification. - 1994.- No. 2.- p.4.

Galeev V.I. Problems of implementing ISO 9000 series standards based on the experience of a number of enterprises. // Certification.- 1994.- No. 3.-p.15.

State standards 2000: (as of January 1, 2000): Index. T. 4 / State. Com. Russian Federation on standardization and metrology. - Ed. official - M.: Standards Publishing House, 2000. - 525 p.

Magazine "Expert" No. 9, 2001

Isaev L.K. Metrology and standardization in certification: Tutorial for universities / Under general. ed. L.K. Isaeva. - M.: Standards Publishing House, 1996. - 169 p.

Isaenko A. Problems of certification and international standards // Boss. - 1997. - No. 5-6. - pp. 16-18.

Krylov G.D. Fundamentals of standardization, certification, metrology: Textbook for university students. - M.: Audit: UNITY, 1998. - 463 p.

Lifits I. M. Fundamentals of standardization, metrology, certification: A textbook for university students. - M.: Yurayt, 1999. - 283 p.

Ogvozdin V. Yu. Quality management and management//Standards and quality. - 1993. - No. 9. - pp. 33-34, 39-42.

Ogvozdin V. Yu. Quality management. Conceptual problems of new ISO 9000 standards//Management in Russia and abroad. - 1999. - No. 6. - P. 77-83.

Ogvozdin V. Yu. Quality management. Fundamentals of theory and practice: Textbook. Benefit. - M.: Business and Service, 1999. - 154 p.

Okrepilov V.V. Total quality management: A textbook for higher education students educational institutions. Book 1/ St. Petersburg University of Economics and Finance. - St. Petersburg, 1996. - 453 p.

Okrepilov V.V. Total quality management: A textbook for students of higher educational institutions. Book 2: Terms and definitions./St. Petersburg University of Economics and Finance. - St. Petersburg, 1996. - 170 p.

Okrepilov V.V. Total quality management: A textbook for students of higher educational institutions. Book 3: Legislative and regulatory documents./St. Petersburg University of Economics and Finance. - St. Petersburg, 1996. - 211 p.

Sabelnikov L.V. Growing requirements for product quality on the world market//Legal. Bulletin Entrepreneur. - 1997. - No. 5. - P. 90-95.

Certification: Collection of normative acts of the Russian Federation / Assoc. auto and ed. "Tandem"; Ed. V. N. Fomina. - M.: EKMOS, 2000. - 143 p.

Product standardization//Law. - 1994. - No. 3. - pp. 10-13, 82.

M E F G O S U D A R S T V E N N Y S T A N D A R T

Information standards system

library and publishing

BIBLIOGRAPHICAL ENTRY.

BIBLIOGRAPHICAL DESCRIPTION

General requirements and rules for drawing up

Official publication

IPC Standards Publishing House

1 DEVELOPED by the Russian Book Chamber of the Ministry Russian Federation for Press, Television and Radio Broadcasting and Mass Media, Russian State Library and Russian National Library of the Ministry of Culture of the Russian Federation, Interstate Technical Committee for Standardization TC 191 “Scientific and Technical Information, Librarianship and Publishing”

2 INTRODUCED by Gosstandart of Russia

3 ADOPTED by the Interstate Council for Standardization, Metrology and Certification (Minutes No. 12 of July 2, 2003)

4 By Decree of the State Committee of the Russian Federation for Standardization and Metrology dated November 25, 2003 No. 332-st, the interstate standard GOST 7.1–2003 was put into effect directly as the state standard of the Russian Federation from July 1, 2004.

5 Instead of GOST 7.1-84, GOST 7.16-79, GOST 7.18-79, GOST 7.34-81, GOST 7.40-82

© Ipk Standards Publishing House, 2004

In the Russian Federation, this standard cannot be fully or partially reproduced, replicated and distributed as an official publication without the permission of the State Standard of Russia.

1 Scope……………………………………….………1

3 Terms and definitions………………………………………………………4

4 General provisions……………………………………………………………..4

5 Single-level bibliographic description…………..………19

6Multi-level bibliographic description…………….……87

7 Analytical bibliographic description…………………118

Appendix A (for reference). Examples of bibliographic records…………………………………………………………………………………141

INTERSTATE STANDARD

––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––

Information standards system

library and publishing

BIBLIOGRAPHICAL ENTRY.

BIBLIOGRAPHICAL DESCRIPTION

General requirements and drafting rules

System of standards on information, librarianship and publishing.

Bibliographic record. Bibliographic description.

General requirements and rules

Date of introduction 2004–07–01

1 area of ​​use

This standard establishes general requirements and rules for compiling a bibliographic description of a document, its part or group of documents: a set of areas and elements of a bibliographic description, the sequence of their arrangement, content and method

–––––––––––––––––––––––––––––––––––––––––––––––––– ––––––––Official publication

presentation of elements, use of prescribed punctuation and abbreviations.

The standard applies to descriptions of documents compiled by libraries, scientific and technical information bodies, state bibliography centers, publishers, and other bibliographic institutions.

The standard does not apply to bibliographic references.

GOST 7.0–99. System of standards on information, librarianship and publishing. Information and library activities, bibliography. Terms and Definitions

GOST 7.4–95. System of standards on information, librarianship and publishing. Editions. Imprint

GOST 7.5–98. System of standards on information, librarianship and publishing. Magazines, collections, information publications. Publishing design of published materials

GOST 7.9–95. System of standards on information, librarianship and publishing. Abstract and annotation. General requirements

GOST 7.11–. System of standards on information, librarianship and publishing. Abbreviation of words and phrases in foreign European languages ​​in bibliographic descriptions

GOST 7.12–93. System of standards on information, librarianship and publishing. Bibliographic record. Abbreviations of words in Russian. General requirements and rules

GOST 7.59–2003. System of standards on information, librarianship and publishing. Indexing documents. General requirements for systematization and subjectization

GOST 7.76–96. System of standards on information, librarianship and publishing. Collection of documents. Bibliography. Cataloging. Terms and Definitions

GOST 7.80–2000. System of standards on information, librarianship and publishing. Bibliographic record. Title. General requirements and drafting rules

GOST 7.82–2001. System of standards on information, librarianship and publishing. Bibliographic record. Bibliographic description of electronic resources

GOST 7.83–2001. System of standards on information, librarianship and publishing. Electronic publications. Basic types and output information.

3 Terms and definitions

In this standard, terms according to GOST 7.0, GOST 7.76, GOST 7.83 are used.

AMBULANCE VEHICLES.

TECHNICAL REQUIREMENTS AND TEST METHODS.

Official publication

Moscow

IPC Standards Publishing House

Preface

1 PREPARED by the All-Russian Research Institute of Standardization and Certification in Mechanical Engineering (VNIINMASH), the All-Russian Research and Testing Institute medical equipment(VNIIIMT), Research Center for Testing and Development of Motor Vehicles (IC NITSIAMT)

2 INTRODUCED BY VNIINMASH

3 APPROVED AND ENTERED INTO EFFECT by Order Federal agency on technical regulation and metrology

dated _________________ 2005 No. _______

4 This standard has been developed taking into account the main provisions of the European standard EN 1789: 2000 Rescue vehicles and their equipment. Ambulances medical care(EN 1789: 2000 Medical vehicles and their equipment – ​​Road ambulances). In this case, additional words included in the text of the standard to take into account the peculiarities of national standardization and economics are highlighted with a single vertical line located to the right of the text.

5 INTRODUCED FOR THE FIRST TIME

Information about changes to this standard is published in the “National Standards” index, and the text of these changes is published in the “National Standards” information indexes. In case of revision or cancellation of this standard, the relevant information will be published in the information index “National Standards”.

© IPC Standards Publishing House, 2005

This standard cannot be fully or partially reproduced, replicated or distributed as an official publication without permission from the Federal Agency for Technical Regulation and Metrology

1 area of ​​use……………………………………………………

3 Terms and definitions................................................... ........................................................ ............

4 Documents submitted for testing……………………………………….

5 Compliance with the requirements of this standard.................................................... .............

6 Technical requirements................................................... ........................................................ ..........

7 Test methods................................................................... ........................................................ ...................

Appendix A (mandatory) List of main characteristics to be included in technical description vehicles submitted for testing………………….…

Appendix B (mandatory) Form of attachment to the test report of an ambulance vehicle in accordance with GOST R………………………………………….

Appendix B (informative) Comparison of the structure of this standard with the structure of the European standard EN 1789: 2000 applied in it....

Appendix D (informative) Information on the compliance of referenced international standards with national standards used in this standard as normative references

NATIONAL STANDARD OF THE RUSSIAN FEDERATION

Date of introduction 2006-01-01

Application area

This standard applies to ambulance vehicles intended for transportation on stretchers, stretcher chairs or wheeled trolleys in the “lying” position with the ability to provide medical assistance to at least one person accompanied by medical personnel. The standard establishes requirements for the design, operational characteristics, equipment of emergency medical vehicles and their testing methods.

The requirements of this standard apply to ambulances specialized assistance(neonatal, cardiological, etc.) with the exception of requirements for equipping with specialized equipment.

The standard contains general requirements for medical equipment used outside hospitals and clinics, where conditions environment may differ from normal conditions indoors.

This standard uses normative references to the following standards:

GOST 9.301-86 Unified system of protection against corrosion and aging. Metallic and non-metallic inorganic coatings. General requirements

GOST 9.032-74 Unified system of protection against corrosion and aging. Paint and varnish coatings. Groups, technical requirements and designations

GOST 12.1.010-76 System of occupational safety standards. Explosion safety. General requirements

GOST 12.2.025-76 System of occupational safety standards. Medical equipment products. Electrical safety. General technical requirements and test methods

GOST 12969-67 Plates for machines and devices. Technical requirements

GOST 15150-69 Machines, instruments and other technical products. Versions for different climatic regions. Categories, operating, storage and transportation conditions regarding exposure climatic factors external environment

GOST 16940-89 Sanitary stretchers. General technical requirements and test methods

GOST 18856-81 Inhalation anesthesia and artificial lung ventilation devices. General technical requirements. Test methods

GOST 24779-81 Pneumatic tires. Packaging, transportation, storage

GOST 25076-81 Non-metallic materials for finishing the interior of vehicles. Method for determining flammability

GOST 26000-83 Pneumatic tires. Method for determining basic dimensions

GOST 30324.4-95 Medical electrical products. Part 2. Particular safety requirements for defibrillators and defibrillator monitors

GOST R 41.10 - 99 Uniform provisions concerning the approval of vehicles with regard to electromagnetic compatibility

GOST R 14.13-2005 Uniform regulations concerning vehicles of categories M, N and O regarding braking

GOST R 41.14-2003 Uniform regulations concerning the certification of vehicles with regard to devices for fastening seat belts

GOST R 41.16-2001 Uniform requirements for approval:

I seat belts and restraint systems for passengers and drivers of motor vehicles;

II vehicles equipped with seat belts

GOST R 41.29-99 Uniform provisions concerning the approval of vehicles with regard to the protection of persons in the cabin of a cargo vehicle

GOST R 41.43-99 Uniform regulations concerning the official approval of safety glass and glass materials

GOST R 41.48-2004 Uniform regulations regarding the certification of vehicles regarding the installation of lighting and light signaling devices

GOST R 41.52-2001 Uniform regulations concerning the design of small-capacity public vehicles

GOST R 41.107-99 Uniform regulations concerning the official approval of double-decker passenger vehicles large capacity regarding the overall design

GOST R 50267.0-92 Medical electrical products. Part 1. General safety requirements

GOST R 50267.27-95 Medical electrical products. Part 2. Particular safety requirements for electrocardiographic monitors

GOST R 50444-92 Medical devices, apparatus and equipment. General technical conditions

GOST R 50574-2002 Cars, buses and motorcycles for emergency services. Colorographic schemes, identification marks, inscriptions, special lighting and sound signals. General requirements

GOST R 51206-2004 Motor vehicles. Content of pollutants in the air of the passenger compartment and cabin. Standards and test methods

GOST R 51323.1-99 Plugs, sockets and connecting devices industrial use. Part 1. General requirements

GOST R 51323.2-99 Plugs, sockets and connecting devices for industrial use. Part 2. Requirements for interchangeability of sizes of pins and contact sockets of connectors

GOST R 51609-2000 Medical products. Classification depending on the potential risk of use. General requirements

GOST R 51616-2000 Automobile vehicles. Internal noise. Acceptable levels and test methods

GOST R 52051-2003 Motor vehicles and trailers. Classification and definitions

GOST R ISO 10079.1-99 Medical products for suction. Part 1. Electrically driven suction devices. General technical requirements and test methods

GOST R ISO 10079.2-99 Medical products for suction. Part 2. Manual suction devices. General technical requirements and test methods

ISO 612:1978 Road transport. Dimensions of cars and tractor-trailers. Terms and Definitions

ISO 2416:1992 Passenger cars. Mass distribution

RDT 25-106-88 Electrical installation of radio-electronic medical equipment. Design and technological requirements. Control methods

PPBO 07-91 - Rules fire safety for healthcare institutions.

PB 03-576-03 Rules for the design and safe operation of pressure vessels

PUE Rules for electrical installations

Note – When using this standard, it is advisable to check the validity of the reference standards using the “State Standards” index compiled as of January 1 of the current year, and according to the corresponding information indexes published in the current year. If the reference document is replaced (changed), then when using this standard you should be guided by the replaced (changed) standard. If the reference document is canceled without replacement, then the provision in which a reference to it is given applies to the part that does not affect this reference.