A non-certified iPhone 5 cable charges. This cable or accessory is not certified... Solving the problem without jailbreaking

Some users iPhone or iPad at least once in your life you have encountered the appearance of an inscription on the screen of your gadget “This accessory is not certified to work with this iPhone.”. At such moments, firstly, there is an understanding that your beloved iPhone is about to run out of charge and turn off. Secondly, the brain begins to intensively think about what could happen to the cable.

Poor quality cable

The fact is that Lightning cables are quite expensive. A regular charger today costs 1,500 rubles on the official Apple website, and the version extended to two meters costs 2,300 rubles. Quite a lot of money, which becomes the reason for buying cheaper Chinese analogues. Such cables are dangerous not only because they may not work correctly, but sometimes they can damage the device: incorrect voltage, etc. You should only buy accessories that are marked “Made for iPhone/iPod/iPad” or other confirmation from Apple. However, the Chinese are no strangers to cunning, so the presence of such an inscription cannot guarantee 100% protection. Buy quality accessories from trusted companies.

The cable is damaged

It could also be that your cable is damaged. Apple chargers (including those for Mac) suffer from this, when near one of the ends the wire breaks due to constant bending. Remembering the price of charging, we put off the moment of buying a new one in every possible way, applying electrical tape to the “wounded” copy and carefully putting it on the shelf in the evening. The author of the note had the same situation: the cable looked terrible and it was clear that it was living its last days. However, everything turned out to be much worse.

IMPORTANT: You can check if the problem is really with the cable by simply taking another cable and putting the device on charge.

Port problem

This is exactly the problem I never expected. For each of us, the iPhone/iPad is a kind of universal soldier that does not break. But that's not true. I don’t know what happened on my iPhone 5, but the charging stopped working, the above message about “No certificate” appeared on the screen, and even charging a friend could not fix the situation. The service helped to figure out: the problem was in the port. The charging port is a vulnerable place, as water and a lot of dust can get there. They fix the problem in a maximum of an hour, it is relatively inexpensive.

Apple has long been the world leader in the mobile device market. Even though the products are quite expensive, they are still in high demand. There are many reasons for this. First of all, the company's developers offer users innovative technologies, unique design, and excellent technical characteristics. The indisputable advantage of gadgets is their high quality and reliability.

Owning Apple devices is considered prestigious. Therefore, most people who are able to afford a smartphone or tablet from this company are truly proud of their purchase. But lately, they are often frustrated by error notifications that appear on the screen when connecting, for example, a cable.

What does it mean: "This accessory may not be supported"? Every iPhone owner can encounter this problem. What is the reason for this error? Let's figure it out.

Features of the iOS operating system

iOS is a closed system. It can only be installed on Apple devices. After studying all the nuances, users have dual feelings - admiration and contradictions. For example, devices running iOS are resistant to various types of virus attacks. How many people, so many opinions. Therefore, disagreements cannot be avoided.

It is quite difficult to really evaluate this system due to its closed nature. However, what can be said with one hundred percent certainty is that the developers did everything possible to protect users. If you look at it from one side, then such actions are an undeniable advantage. However, most often they are the ones who create certain problems.

Relatively recently, iPhone owners began to encounter an error accompanied by a message appearing on the screen. It says: "This accessory may not be supported." The original cable, which is produced by Apple, does not cause such problems. But when purchasing third-party accessories, the system automatically recognizes a threat to the device. Most often, this is what leads to the error message.

The first swallows

For the first time, this problem began to appear in smartphones running the seventh version of iOS. It was at this time that developers began an active fight against unofficial accessories that could be used for Apple gadgets. This list also includes a non-original iPhone charger. “This accessory may not be supported” was the message you would see when connecting it.

But iOS7 still worked with such accessories, and already in the ninth version changes were applied that led to the fact that the devices completely stopped functioning.

Lightning cable

By and large, this problem became widespread after Apple switched to new cables that are equipped with a Lighning port. It was when using them that gadget owners first encountered a similar error. Messages began to appear on the screen saying: “This accessory may not be supported.”

The iPhone 5S is the first victim to receive a lot of negativity from users. You can find a large number of reviews on this topic on the Internet. Ordinary people do not understand why the fight against unofficial accessories is needed. However, if we look at this issue much deeper, we can learn about cases where expensive gadgets failed due to poor-quality cables. Moreover, not only the batteries broke, but the devices themselves turned into “bricks.” The worst thing about all this is that even the owners were injured.

Currently, most trading platforms are selling counterfeits. Sometimes you can find Apple products at a low price. However, the low price indicates that this device is not original. Based on this, the company has found one single way out in the fight against scammers, maximally protecting both its products and users.

Lack of MFi support

The certification system became the only solution that made it possible to protect iPhone owners from low-quality accessories. The latter currently cause great harm not only to users, but also negatively affect the stability of consumer demand. Doubts about the quality of Apple products have already begun to appear. However, you need to understand that the problem is not with the smartphone at all if the message appears on the screen: “This accessory is probably not supported.”

iPhone 5S and other models report this error if there is no Apple “signature” when connecting the cable. Not a single handicraft accessory can pass certification. The check is carried out automatically. When the system searches for inconsistencies, the gadget simply turns off. In order to avoid such problems, you must use only original devices that are manufactured directly by Apple itself or its partners.

Accessory damage

If your iPhone says, “This accessory may not be supported,” you need to check the cable for visible damage. Sometimes the problem is a violation of the port itself or the integrity of the wire insulation. Neither the original accessory nor the fake are immune from this. It's surprising that even the slightest damage to the phone's system can be considered critical. After the error is automatically detected, the gadget's workflow will be suspended, and a message will appear on the screen: “This accessory may not be supported.”

To avoid damage to the cable, it is recommended not to bend it during storage or use. The highest quality models are those that are equipped with a hard rubber braid or titanium braid. They are somewhat more expensive than other options, but have a longer service life.

"Jailbreak". We are looking for a way to fix the problem

Unfortunately, currently no system is perfect, iOS is no exception. Although it has high-level protection, advanced users know how to bypass some restrictions. To put it in simple words, simply hack the system. These actions are illegal, so the device will be denied warranty service. Before deciding to take such a step, you need to weigh all the possible risks.

So, if you still want to use non-original accessories for the iPhone 5S and subsequent models, then you need to run the activator of non-certified Lightning cables on the gadget.

Step-by-step description of “cheating” the system:

• Jailbreak using TaiG.
• Open the Cydia directory.
• The file storage must be updated.
• After that, go to the Source tab.
• Activate the installation of Support Unsupported Accessories by accepting the terms.
• After the process is completed, you should reboot the device.

If you implement this tweak on a smartphone, the message “this accessory is probably not supported” will no longer appear on the screen. However, it is necessary to understand that all responsibility for the manipulations performed lies entirely with the owner of the device. If he contacts the service center, he will most likely be refused service or, as an alternative solution, he will be offered paid repairs.

Finding causes and eliminating them

In order to protect yourself from such a mistake, you simply need to purchase a new high-quality cable, no matter how trivial it may sound. However, if for some reason you cannot do this, and the message “this accessory may not be supported” constantly appears on the screen, then you can try some simple steps.

First of all, it is recommended to turn the cable over. Sometimes some of the contacts are damaged on one side, but remain functional on the other. This method will not help get rid of the error for a long time, but it will work for several hours.

If you urgently need to charge your gadget, and an error message appears on the screen with the following content: “This accessory is probably not supported,” then you can simply turn off your smartphone. In this state, the operating system does not function, and the power controller will still transfer current to the battery.

The cause of this error may be a rather trivial problem - contamination of the port. Sometimes fine dirt or dust gets clogged directly into the connector itself. It is for this reason that the device stops recognizing the connected cable. To fix the problem, simply clean the port.

Finally

This article examined the main reasons leading to an error in the functioning of the gadget if non-certified accessories for the iPhone 5S and other models from Apple were connected. It is important to understand that if a message appears, the phone is not in danger of serious damage. As for the rest, the choice is yours: bypass the system and take risks or give preference to the original cable.

Good time! “This accessory is probably not supported” – almost every iPhone owner has encountered this system notification at least once. Most often, a smartphone says such unpleasant words to its owner when connecting a non-original USB cable or a “semi-basement” adapter from Lighting to a 3.5 mm jack.

Regardless of the circumstances preceding this message, the result is the same: this cable is not certified, it is impossible to charge the device (listen to music), or (if we are talking about charging), the battery life is not restored as it should. Disorder? Of course! Can this be fixed? Let's try...

Let's figure out what to do in this situation.

Non-certified cable - can it be used and why buy it?

The bottom line is that original iPhone cables are quite expensive. When the cord included in the kit fails, many owners, wanting to save money (and quite noticeably) purchase a non-original analogue, mainly from Chinese manufacturers.

These cables have 2 problems:

• Firstly, they can easily cause the iPad (iPhone) and . In simple terms, you never know whether this wire will work or not. Moreover, it can break even without visible damage.
• Secondly, their use can cause significant harm to the Apple gadget due to incorrect output voltage and other technical nuances.

That is why only an accessory that is appropriately marked “Made for iPhone/iPod/iPad” should be used in conjunction with the iPhone.

Along with this, even the presence of the above-mentioned inscriptions is not always a guarantee of authenticity. That is why accessories should be purchased exclusively from certified and trusted sellers.

Be that as it may, regardless of the conditions that prompted you to purchase a non-original wire (although it is possible that you purchased a fake, having been misled), there is only one problem: the device is not charged with this Lighting cable - what to do?

How to charge with a non-certified cable - step-by-step instructions

If your iPhone or iPad displays notifications about connecting an uncertified accessory, try to resolve the issue by following the steps in the following guide one by one:

In most cases, the above instructions help and everything works fine.

However, I would highly recommend using non-original charging solely as a temporary phenomenon - they are very large and “killing” an expensive device for the sake of saving 500-1000 rubles is simply stupid.

P.S. Do you almost always use “real” wire? This is a very wise and correct decision - support your position with a “like”!

So, you once again needed to recharge your Apple device, but this time the message “This accessory may not be supported” appeared on its display. What kind of error is this, why it occurred and how to fix it - we will look at all this in our article today.

Causes of the error "This accessory may not be supported"

For this problem, there are usually several possible causes:

• Cheap replacement for the original Lightning cable from Apple. Some substitutes can work great and last a long time. However, some of them are categorically rejected by the iPhone or iPad.
• Damage to the original Lightning cable. It's no secret that Lightning cables wear out incredibly quickly. Some users claim that less than six months pass before their Lightning cable (the place near the connector) wears out and becomes unusable.
• The charging port of the device is damaged or dirty. Dust, dirt, or moisture may have gotten into the port under the Lightning cable, causing the “This accessory may not be supported” error to appear.

Fixing the "This accessory may not be supported" error

Reconnecting the Lightning cable

So, in most cases this problem can be solved quite simply. First of all, you should try to simply reconnect your device to the Lightning cable several times to try to get rid of the error. Some users claim that after they reconnected the charger to their iPhone or iPad several times, the “This accessory may not be supported” error went away.

Change USB port on Mac or PC

Let's say you encounter the "This accessory may not be supported" error while connecting your iPhone or iPad to your PC/Mac. A possible cause of this problem could be a faulty USB port.

Try connecting your Apple device to a different USB port and see what happens. If the connection error has disappeared, then perhaps you are experiencing some problems directly with the USB port itself on your computer/MacBook.

Some users strongly recommend trying the following: Connect a Lightning cable to your iPhone or iPad. Wait until the display shows the "This accessory may not be supported" error again. Then reboot your device with the charging cable connected. Once it turns back on, check for the error. This is the cunning way people get around this problem from time to time.

The trick with the error message

So, if none of the above helped to solve the error “This accessory is probably not supported,” then you can resort to one small trick with its message itself. Connect the Lightning cable to your Apple device and wait until the error appears.

As soon as it appears, press and hold the “Close” button on the display, and then disconnect the Lightning cable from the device. Then connect again and see if the problem has been fixed. This method helps very few people, but, as users note, sometimes it works.

Cleaning the charging port on your device

As we have already stated in the reasons, the “This accessory may not be supported” error may appear due to a dirty charging port on your iPhone or iPad. You can solve the problem by simply cleaning the connection port.

Take something like a paperclip and carefully try to clear the Lightning connector on the device of anything that may be there. Perhaps dust has accumulated there or something has gotten in there that prevents a correct connection to the device from being established.

Once you're done cleaning, try connecting the Lightning cable to your iPhone or iPad again. Pollution is the second most common cause of this problem. However, if this was not the case, then we have sad news for you.

Replacing the Lightning cable

Ok, nothing obviously works and you can't charge your Apple phone or tablet. Using the method of elimination, it’s not hard to guess what the cause of the error “This accessory is probably not supported” is - a Lightning cable or a port for it on the device.

If you are using a third-party cable, not from Apple, then try replacing it with the original one. Yes, such a solution will cost you much more, but it will definitely solve the problem. If you are using an original cable, it could simply be damaged. Apple users constantly complain that the Lightning cable breaks down incredibly quickly. In this case, you will need to find a new Lightning cable.

Well, if you realized that the problem is not in the cable, then it definitely lies in the port on the device. It could have been damaged due to some event, after which connecting the charger to the phone became impossible. If you think this is the case, we recommend that you contact a service center.

Found a typo? Select the text and press Ctrl + Enter

China rules! But not in this case and here's why.

In the comments on our site, readers are still asking questions related to the use of USB cables for iPhone and iPad. Some people complain that a message appears on or on the smartphone screen stating that “this cable or accessory is not supported or certified.” In this case, the device does not charge and does not synchronize, restore or updating the gadget also fails. Why do Apple smartphones and tablets not like some USB cables and what can be done about it?

These messages first appeared in iOS 7 on the iPhone 5 - “This accessory may not be supported.” On iOS 8 and later, the content of the message has changed slightly - “This cable or accessory is not certified and is not guaranteed to work reliably with this iPhone.” There are several reasons:

1. You are using a non-original and non-certified USB cable.

The Lightning connector only looks simple from the outside; under its shell there is a microcircuit with 4 microchips. We don’t fully know how they work and what a particular one is intended for, but it is reliably known that this controller:

1. Switches the contacts to which the iPhone is connected - the Lightning connector is double-sided and is inserted into the connector on either side.
2. Responsible for the secure transfer of information between the device and the computer when synchronizing with iTunes, restoring and updating iOS.
3. Limits voltage and current when charging the device.

Yes, the original Lightning cable is too expensive, for example, in the Russian App Store they ask for 1,590 rubles. And this is for 1 meter of wire and two connectors, one of which is the simplest (USB).

Manufacturers of accessories spoke out in defense of user interests and offered analogues. However, “cable is different” and in pursuit of the lowest possible cost, some manufacturers (mostly Chinese) “forget” to add the necessary microchips to the Lightning connectors so that they at least comply with the MFi license. What kind of license is this?

MFi(short for " Made for iPhone/iPod/iPad" - Made for iPod/iPhone/iPad) is an Apple licensing program for manufacturers of accessories compatible with the iPhone, iPod Touch and iPad.

Made for iPod/iPhone/iPad means that this cable or accessory has been specifically designed to connect to your iPod, iPhone, or iPad and has been certified by the developer to meet Apple performance standards. .

Apple vouches for certified cables and accessories, for which it receives appropriate royalties from each unit, which means they are safe for your device (theoretically).

In addition to the price, original Apple USB cables have serious problems with durability: they quickly fray and break.

I myself stopped using the original Lightning cable from the iPhone 5s in favor of the black Juicies+ with lightning connector and I don’t regret it at all.

So, to ensure that your iPhone, iPod Touch and iPad are charged at the appropriate voltage and current, and sync without errors, use at least a certified Lightning cable. It is cheaper than the original one. But, if you do not have such an opportunity, there is a way, like Apple protection, to charge, synchronize and use the cheapest cables.

"The cable is not certified." What to do?

In some cases it is enough:

Sometimes you need this:

For jailbroken devices in Cydia, find and install the “Support Unsupported Accessories 8” or “Unauthorized Lightning Cable Enabler” tweak.

Remember that the problem cannot be completely eliminated in this way - this is only a temporary solution. Apple can always block the “singed” cable at the iOS level. In addition, you risk running into an expensive replacement of the power controller - the cost of the service starts at $80.

Therefore, we strongly recommend using either an original accessory or a certified one (for example, any owner of an iPhone 5 and later models can afford one).

There are times when the warning “This cable or accessory is not certified and is not guaranteed to work reliably with this iPhone” appears even when connecting the original cable, for example, if...

2. USB cable is damaged

If you are definitely using the original cable, and the ill-fated message still appears on the screen, your cable may simply be damaged.

If there are no visible signs of damage, to check, take a known intact (and, of course, original) cable and check the operation of your device with it. If it works, replace the cable with a new one.

3. The connector on the iPhone/iPod Touch/iPad is clogged

We have already written about this situation in. The bottom line is that various debris gets into the connector on an iPhone or iPad (this is especially true for Lightning connectors) and accumulates there for a long time. At some point, there is so much debris that it breaks the cable contact in the connector - and, accordingly, a corresponding warning appears. The solution is to carefully clean the debris from the connector. To do this, you can use a toothpick or a cotton swab moistened with alcohol. I advise you to clean the Lightning connector with your iPhone turned off.

Conclusion

And finally. Since 2008, I have always used the original cables to charge and sync my iPhone and iPad - it's safe and reliable. But if one of them was damaged and failed, I didn’t buy the other original one - it was expensive. Instead, I used a certified one, which I advise you to do. If you don’t have one at hand, you can charge the device once or twice with the cheapest cable, but don’t abuse it - the “unexpected” can sneak up unnoticed.