DIY turned wooden door handle. DIY wooden handles and locks DIY wooden fountain pen

The charm and aesthetics of wooden door handles are incomparable to products made from other materials. Similar products are used for baths, saunas, for entrance and interior paintings. A wooden door handle is easy to make even for a novice craftsman. Made with your own hands, it will please the eye for a long time and cause pride in your skills.

Wooden handle on the bath door

Advantages and disadvantages of the material

Despite the widespread use of composite and synthetic materials, wooden door handles for bathhouses are always popular. In addition, such a door handle looks best on a wooden canvas.

Key advantages of a handle for a wooden canvas:

1. This product, like the high-quality polished canvas and the box, is pleasant to the touch.
2. When arranging baths, fittings made from natural materials are simply irreplaceable. A box, canvas, or wooden handle will prevent you from getting burned.

1. It’s easy to make it from a pliable material and install it on the door with your own hands, which will save money on the purchase of other bath accessories - brooms, rugs, hats.
2. It is possible to create different sizes and shapes from leftover material from the manufacture of boxes and canvas.
3. To make handles for a cabinet or an interior door, you can use a board made of any type of wood.

There are also a number of disadvantages. Among them:

• The strength of such fittings is less than metal ones. If you want to see just such a model on the canvas, it is recommended to choose a board made of durable wood, the same as for the box.
• A handle should be made from wood only if the blade is made of the same material, otherwise it will quickly fail.
• The door handle, as well as other door elements, including the frame, are carefully treated with special compounds for durability.

Material selection

If the product is intended for the entrance panel, it is made from strong, good quality wood. There are recommendations to use coniferous wood, because, among other things, they exude a pleasant aroma and have an antibacterial effect, and the material itself is inexpensive, and you can also make a box from it.

Note! The safest board in terms of cleanliness (does not emit resin) is made from hardwood; it is also usually used for door frames.

Options for wood material from which to make an excellent door handle:

1. Oak is a durable material, and products made from it are the same. oak is resistant to mechanical stress, looks respectable and will suit the entrance group (leaf and frame) made of oak in a country cottage.
2. Beech is a valuable material, its properties are equal to oak. A distinctive feature is its uniform texture.
3. Poplar is distinguished by bactericidal properties, which is why such door fittings are used to decorate the door in the bathhouse.
4. Linden has a calming effect on the human body. This material is often used in the bedroom.

Manufacturing methods

There are two popular ways of making products from wooden material:

1. turning;
2. thread.

Turned products

Such parts are made on a lathe; the product cannot be manufactured without special tools. “Balls” and “mushrooms” are made using a similar method. The manufacturing process consists of several stages.

You will need a blank - a wooden board (block) with a section of the required size, which is selected in accordance with the parameters of the product. Leftovers from making the door frame will do. The board must be dry, intact, without cracks or other defects.

Note! The integrity of the blank board is important both for the aesthetics of the finished door handle and as a safety requirement, because such a blank can break at any time during rotation and injure your hand.

Manufacturing stages:

1. An octagon is made from a blank board; a plane is used for this. It’s faster to work with an electric planer, but if you don’t have one, then a regular manual one will do.
2. Next, the hewn workpiece is clamped on a lathe and a cylinder is formed using a chisel.
3. Next, markings are applied to it for the future part. The product is formed using a semicircular or beveled cutter.

If you need to make handles for several canvases, then take a block of such length that it is enough for 3-4 copies, then saw them. The surface finishing is done manually using fine sandpaper.

Carvings

This model is easier to manufacture and does not require special equipment such as a lathe. Tools and materials you will need:

• Board.
• The branch is of a non-standard shape and of such a size that it is convenient to grip the door handle.
• Saw, jigsaw.
• Milling cutter and attachments are optional.
• Drill or screwdriver.
• Sandpaper or sander.
• Clamp.
• Epoxy adhesive.
• Nog.

Sequence of work

1. Clean the board from bark and sand it. Apply a drawing of the future base for the pen onto the prepared surface.
2. Cut the workpiece along the contour, thereby giving it a suitable shape.
3. Sand the sides and make a shaped notch along the edges using a router.
4. The handle itself consists of an unusually shaped tree branch. Remove the bark from it, if necessary, trim and sand it.
5. Trim the branch so that it is in tight contact with the prepared board.
6. Connect the branch and the base under it using glue. For permanent fixation, clamp with a clamp.
7. Drill holes in the base so that they go to the base. Drive the dowels there, pre-coated with glue. Remove the excess length of the pegs.
8. Dry the assembled product overnight.
9. Cover with varnish or paint after drying and mount on the door.

Simple option

Using this method, making a handle for a bathhouse is easy even for a novice craftsman. To work, you will need a board with approximate dimensions of 26 × 10 × 5 cm. First, you need to sketch a sketch on a sheet of paper.

Note! Choose a simple handle shape so that it is easy to cut. A checkered piece of paper is suitable for the drawing.

Transfer the contours of the workpiece onto wood and cut it out with a jigsaw. Sand the product well, round it a little, so it will turn out neat. If you wish, you can make a carving, burn an image, an inscription. This handle is attached directly to the canvas, without a base. Self-tapping screws are used for this.

Important points

When making a product from a board, consider several important points:

1. The bark must be removed from the material, otherwise the handle will not last long.
2. All edges of the product are carefully sanded, as are the canvas and the box. At first, you can use a power tool, but you will have to manually adjust the evenness.

1. All wooden parts are treated with special compounds. This will protect them from moisture (especially if the handle is for the bathhouse door), microorganisms (fungi, mold), and fire.
2. To give the handle a tint, use a wood stain of a suitable tone.
3. Finishing is varnishing in several layers. At the same time, make sure that there are no drips left on the product.

Conclusion

Making a wooden handle for a bath door or front door is not difficult; you only need desire and a certain set of tools. In this matter, thoroughness and strict adherence to the technology of working with the material are important.

All photos from the article

Wooden handles for baths, saunas and other premises are quite expensive. However, their design is not complicated, so if necessary, you can make a handle yourself.

In our article we will tell you what the main advantages of handles made of natural wood are, and also provide several algorithms that allow you to make such a part with minimal time and effort.

Both metal and plastic heat up in a bathhouse, but such products do not!

Pros and cons of wooden handles

Today in carpentry, wooden handles are widely used for baths, furniture, entrance and interior doors, windows, etc. Sometimes such parts are even installed in cars, so the question of their popularity among specialists is not even discussed.

And yet, along with the advantages, wood handles also have disadvantages, so for an informed choice it is worthwhile to thoroughly consider such products:

As you can see, a wooden handle is a rather specific part, so it does not need to be installed everywhere. But if you are determined to choose this option, then below we will provide recommendations for making it yourself.

Manufacturing method

Turned products

The easiest way to make such parts is on a lathe. For example, wooden furniture handles in the shape of a ball, if you have a certain skill, can be sharpened several times per hour.

The process itself looks like this:

• As a blank for the section we need. The tree must be dry and intact, without cracks or other defects.

Note!
The presence of cracks and delaminations not only degrades the quality of the product, but can also lead to injury if the workpiece splits while rotating on the machine.

• To make it easier for us to work, we turn the block into an octagon using a plane.
• We clamp the workpiece in the lathe and begin processing it using a cutter, forming a cylinder.
• We put marks on the cylinder according to the sizes of the parts of our future part. We use angular and semicircular cutters to make a selection, forming the outline of the product.

Advice!
Wooden furniture handles are most often small in size, so it is more rational to make several of them from one piece.

Wood is not only a universal and popular building material. In everyday life, wooden objects are used everywhere and constantly, especially since wood is a very easy material to process. Making a wooden handle for a knife with your own hands is not at all as difficult a task as it seems at first glance.

Types of handles

A wooden handle for a folding or regular kitchen model should first of all be comfortable. Actually, this is the attractiveness of making it yourself: you can make a handle of any configuration, any size suitable for your hand, and impregnate it with any composition.

When making your own, 2 types of wooden handles are most often used:

• mounted - a cavity is formed at the end of the product into which a blade with a narrow shank is fixed. The handle is a single unit and is very resistant to damage. A folding knife cannot be made this way;
• overhead – suitable for blades with a wide shank. In this case, the handle consists of two parts that overlap the blade. The handle is heavier, which helps balance the wide blade. For a kitchen knife, for example, this is important. The folding model always refers to the invoice type. The photo shows a set for the folding version.

Materials and tools

To make a kitchen knife with a wooden handle, you need to select the right wood, process it, impregnate it, cut in the parts and secure it using the chosen method. For this you will need such materials.

• Wood - as a rule, choose wood with an original texture and pattern so that the product is attractive, like in the picture. In this case, preference is given to hard and durable species - oak, walnut, maple. It is more difficult to cut a handle from such wood, but the result will last a long time. In any case, the wood must be selected dry - no more than 12-15% humidity, and must be treated with antiseptics.
• The blade itself is purchased ready-made. For manufacturing, you need to know exactly the dimensions of the shank and the weight of the blade.
• Fasteners - for kitchen knives with a mounted handle, epoxy resin is used. To attach the attachment handle, you needed a brass or copper rod of the required diameter.
• Impregnation – the product must be impregnated with a suitable composition. Most often, linseed oil or special dish varnish is used. It is necessary to impregnate the handle not only to give it a beautiful shine: the composition protects the wood from moisture. How to impregnate a wooden knife handle depends on the type of product.
• Tools - as a rule, the set is quite ordinary: cutters, plane, hacksaw. However, to speed up the process, you can also resort to electric models.

How to make a handle

To make a handle, you need some experience working with wood.

At the same time, this work is quite suitable for practice for a beginner.

1. The wood must be impregnated with an antiseptic before work.
2. Using a hacksaw or jigsaw, cut out a workpiece of a suitable shape from wood. If this is your first try, it is better to do without finger grooves, but if you already have experience, you can choose the most optimal configuration. At the first stage, the workpiece has only an approximate shape, then its shape is brought to perfection using a cutter and a hacksaw. How to process a wooden knife handle depends on the skill and desire of the craftsman.
3. The finished workpiece is processed with sandpaper until perfectly smooth.
4. A groove for the blade is drilled at the end of the product. The depth depends on the weight of the blade. The shank should fit easily onto the handle. The photo shows the formation of the groove.
5. Then the product is treated, for example, with linseed oil. Oil is poured into a small saucepan, placed in a water bath, and the workpiece is immersed in the impregnation and held until air bubbles stop appearing.
6. The wooden handle is left to dry.
7. Prepare epoxy resin according to the instructions. They mix it with sawdust and fill the cavity of the handle with resin.
8. A blade is inserted into the cavity, ensuring the correct position, and left to dry for a day. In order not to stain the product, and the epoxy resin is very difficult to wipe off, the blade is wrapped with tape, as in the picture.

The attachment model for a folding knife is made slightly differently. Here the tool kit will include rivets and a vice.

1. The rough-shaped workpiece is held in a vice and cut into 2 parts. Both parts are then finished to perfection using cutters and sandpaper.
2. The product is assembled: the blade is placed between the handle parts. Mark the attachment points and drill holes through the workpiece. In this way, perfect alignment of the holes is achieved.
3. Then a rivet is made from a rod with a diameter that matches the diameter of the hole.
4. The blanks are treated with oil according to the technology described above.
5. Epoxy resin is applied to the inside of the parts, shank and rivets. Assemble the product and wrap it tightly with tape.
6. In a day the handle should be ready. If necessary, it is cleaned of excess epoxy resin.

In the video, making a handle with your own hands is covered in more detail.

Let's look at how to make wooden handles and door locks for cottages, apartments, and wooden furniture. Existing factory-made door handles and latches do not provide much flexibility in freezing weather and in buildings with high humidity. The main photo shows one of many door latches. Shown on the right below A simple slider latch, it is most suitable for wooden sheds, but can be used in the country on any of the doors.

A variety of wooden handles and locks.

This photo shows a door handle with a latch. By turning such door handles counterclockwise, we hide the pin in the lock; the handle is located on a wooden bolt. The bolt is spring loaded so these door locks can actually close on their own. Although it should be noted that such door fittings have too high friction and will not always work perfectly.

This is my favorite castle in the house. Having a handle in the lock - a lever that has the purpose of moving the slider inside the body. It is very pleasant to open and close doors with such a lock.

These wooden handles and locks will decorate any main cottage door. This latch closes the door very softly when it is slammed. You can fully evaluate the operation of the latch by watching the video.

The photo shows an interior door latch, which is typically located in a home. The lock consists of a wooden pin that fits into a hole and locks the bathroom door. In fact, all "locks" are made to fit the pin precisely into the hole.

The door latches shown in the photo below are already more advanced. They got their start from their original door handles, which were described earlier. They incorporate springs that allow the latches to close on their own when the door is slammed. For toilet and bathroom doors there is an additional pin that is installed in the lock body and prevents the handle from turning.

Wooden door handles for premises for various purposes are quite expensive. The high price is due to the use of manual labor and originality of execution. The design itself is not particularly complicated, and you can do it yourself. The article indicates the advantages and disadvantages of wood models, and also describes various technologies for creating door hardware with your own hands.

Features of wooden door handles

Since ancient times, door fittings have been made from wood. Later, metal products and elements made from modern materials competed with them. However, even today, wooden models are widely popular due to their advantages:

1. High-quality sanded and processed wood is pleasant to the touch. A wooden handle is not as cold as a metal or plastic handle.
2. Wood fittings are indispensable when arranging baths and saunas. Wooden elements do not heat up to high temperatures, like metal ones, and the likelihood of getting a burn when contacting the handle is reduced to zero.
3. Easy to make wooden door handles with your own hands. Wood is easy to process, and working with it does not require expensive equipment. Using bars, slats or logs, you can create a structure of any shape.
4. Affordable price.

Despite significant advantages, wooden products also have some disadvantages:

1. The strength characteristics of wood are inferior to metal elements. This fact must be taken into account when constructing a structure that is subject to significant loads. In this case, it is better to give preference to hard wood or metal.
2. Prolonged contact with metal surfaces causes wood to deteriorate. Therefore, it is advisable to select door handles for doors in accordance with the material used to make the door leaf.
3. In order for a wooden handle to serve for a long time, it should be carefully treated: sanded and impregnated with protective compounds.

Choosing wood for making a handle

Accessories mounted on entrance doors must be made of strong wood. Some experts recommend using conifers, which, when heated, release a pleasant aroma that is beneficial to human health. However, hardwood species, characterized by an elegant textured pattern and good mechanical resistance, are no less in demand.

Advice. It is better to make door handles from deciduous trees, so that no resin remains on your hands when gripping them.

To make door handles with your own hands, you can use:

1. Oak - characterized by strength, resistance to external influences and hardness. Oak products look respectable and noble, and are great for decorating country cottages and apartments.
2. Beech is a valuable species, similar in many qualities to oak. The wood has an unusual pinkish tint with a uniform texture.
3. Poplar - has pronounced bactericidal properties, which is why it is often used when decorating a steam room.
4. Linden - has an anti-inflammatory and calming effect on the human body.

How to make a door handle with your own hands: carved model

Tools and materials

Creating a carved model of a door handle involves using the following materials and tools:

• wooden flat blank;
• branch of unusual shape;
• saw and electric jigsaw;
• cutter and attachments;
• drill;
• sandpaper or grinder;
• clamp;
• epoxy adhesive;
• dowels;

Manufacturing and installation

The sequence of creating a door handle:

A simple version of a wooden bath handle

A homemade door handle will surprise the guests of the bathhouse and will become the pride of the owners of the steam room. Building a simple model is not difficult. Let's consider an example of creating a handle 26 cm long and 10 cm high. For work you will need a board with dimensions of 26 * 10 * 5 cm, a simple pencil and a jigsaw.

Algorithm of actions:

Door handle in Russian folk style

An example of a carved handle will harmoniously fit into an interior designed in a traditional folk style. The handle will beautifully complement an antique-style door. The design of the model includes 6 elements:

• base;
• intermediate bars - 2 pcs.;
• cubes - 2 pcs.;
• lever.

First you need to prepare each part separately, fit them together and polish them. Manufacturing procedure:

DIY turned wooden door handle

To make a turned handle for interior doors, you will have to master the skills of working on a lathe. Creating such a model requires the use of the following tools and materials:

• machine with three-jaw chuck;
• oak block;
• wood cutters;
• coarse and medium-grain sandpaper;
• wax mastic.

Sequencing:

1. Prepare the workpiece. Cut the square block a little along the edges on one side. Thus, the rounded part will be evenly fixed in the machine chuck.
2. Insert the workpiece into the jaws and use a semicircular cutter to give it a cylindrical shape along its entire length.
3. Level the surface of the block with the end of the cutter, holding it at a slight angle.
4. Use the sharp edge of the cutter to shape the upper part of the handle.
5. Step back some distance from the edge and carve out a base, the back of which will be adjacent to the door leaf.
6. Trim the base of the handle with a straight cutter and sand the surface. When sanding, it is important not to overdo it and not to put too much pressure on the paper, otherwise you can burn your fingers on the rotating elements and ruin the product.
7. Cover the handle with wax mastic. The product penetrates into the pores of the wood, protecting the material from external influences and giving the handle a matte shine.
8. Using the point of the cutter, cut off the handle from the rest of the rough timber.
9. Insert the handle into the door.

During the manufacturing process, some nuances should be taken into account:

• for processing it is necessary to take material without cracks and knots, otherwise when rotating the workpiece may split and cause injury;
• It is advisable to make several handles from one blank at once, since turned models are small in size;
• Before grinding and impregnation with a protective composition, all minor cracks on the handle must be filled with putty intended for woodwork.

Installing handles on interior doors

Inserting handles into interior doors with your own hands begins with marking the location of the fittings. According to established standards, a standard door handle is mounted at a height of 80-100 cm from the floor (depending on the height of the residents). The work is performed in the following sequence:

1. Mark the installation location on the door leaf, stepping back at least 6 cm from the edge.
2. Using a ruler, draw a straight line across the end of the door and continue marking from the back of the door.
3. Use a drill to prepare a hole ½ the thickness of the door.
4. Repeat drilling on the second side of the blade. It is important that there is no deviation of the hole axis horizontally or vertically.
5. Use a chisel to knock out a niche for mounting the latching mechanism.
6. Insert the latch and check that its edge is in the same plane with the door leaf.
7. Place the two parts of the handle on different sides of the door and guide them through the hole. Tighten the structure with bolts.
8. Finish the end of the box with a metal plate - prepare a sample for the tongue and frame, try it on and fix the plate with screws.

Over time, you may need to make minor DIY repairs to interior door handles. Sometimes, to prevent elements from becoming loose, it is enough to tighten the screws with a screwdriver.

DIY wooden door handles: photo ideas

The design of door handles amazes with a variety of colors and designs. The fantasies of woodworking masters are embodied in fancy shapes, graceful curves and stylistic design of door accessories.